Object-oriented approach in design for lift installation of offshore structures

by Lim, C.K., Choo, Y.S., Nee, A.Y.C.
Published 2014

Stresses and strength of padeye to circular pipe connection

by Choo, Y.S., Lee, K.H., Lee, W.H.
Published 2014

The effects of eyebar shape and pin/hole tolerance on its ultimate strength

by Choo, Y.S., Choi, K.C., Lee, K.H.
Published 2014

Characteristics of photopolymeric material used in rapid prototypes: Part II. Mechanical properties at post-cured state

by Cheah, C.M., Fuh, J.Y.H., Nee, A.Y.C., Lu, L., Choo, Y.S., Miyazawa, T.
Published 2014

Dynamic response of delaminated composite beams with intermittent contact in delaminated segments

by Ju, F., Lee, H.P., Lee, K.H.
Published 2014

Response of plate and shell structures due to low velocity impact

by Liu, Z., Swaddiwudhipong, S.
Published 2014

Material characterization of photo-fabrication process

by Lu, L., Fuh, J.Y.H., Choo, Y.S., Nee, A.Y.C., Lee, K.C.
Published 2014

Dynamic response of large strain elasto-plastic plate and shell structures

by Swaddiwudhipong, S., Liu, Z.S.
Published 2014

A decision support system for heavy lift

by Choo, Y.S., Ju, F., Li, L., Li, M.
Published 2014

Free vibration of plates with stepped variations in thickness on non-homogeneous elastic foundations

by Ju, F., Lee, H.P., Lee, K.H.
Published 2014

An analytical study of the cone penetration test in clay

by Teh, C.I., Houlsby, G.T.
Published 2016

Strength of intersections in composite sandwich vessels under external pressure

by Choo, Y.S., Horne, M.R., Montague, P.
Published 2014

Free-vibration analysis of composite beams with multiple delaminations

by Ju, F., Lee, H.P., Lee, K.H.
Published 2014

Response of laminated composite plates and shells

by Swaddiwudhipong, S., Liu, Z.S.
Published 2014

Revealing the bearing capacity mechanisms of a penetrating spudcan through sand overlying clay

by Teh, KL, Cassidy, MJ, Leung, CF, Chow, YK, Randolph, MF, Quah, CK
Published 2021

Characteristics of photopolymeric material used in rapid prototypes: Part I. Mechanical properties in the green state

by Cheah, C.M., Nee, A.Y.C., Fuh, J.Y.H., Lu, L., Choo, Y.S., Miyazawa, T.
Published 2014

Configuration of progressive dies

by Cheok, B.T., Nee, A.Y.C.
Published 2014

Free vibration of composite plates with delaminations around cutouts

by Ju, F., Lee, H.P., Lee, K.H.
Published 2014

Advanced analysis for the assessment of steel frames in fire

by Liew, J.Y.R., Tang, L.K., Holmaas, T., Choo, Y.S.
Published 2014

Improvement of the UV curing process for the laser lithography technique

by Fuh, J.Y.H., Choo, Y.S., Nee, A.Y.C., Lu, L., Lee, K.C.
Published 2014