Intermetallics evolution and shear strength of carbon nanotubes- reinforced sn-5sb solder on copper board

by Dele-Afolabi, Temitope Theophilus
Published 2015

Experimental and numerical investigation of plain and Ni-reinforced porous alumina ceramics composites produced with agro-waste pore formers

by Theophilus, Dele-Afolabi Temitope
Published 2018

Investigating the effect of porosity level and pore former type on the mechanical and corrosion resistance properties of agro-waste shaped porous alumina ceramics

by Dele-Afolabi, Temitope T., Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Sobri, Shafreeza, Calin, Recep
Published 2017

Research trend in the processing and application of macroporous ceramic components

by Dele-Afolabi, Temitope Theophilus, Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Sobri, Shafreeza, Calin, Recep
Published 2017

Research trend in the development of macroporous ceramic components by pore forming additives from natural organic matters: a short review

by Dele-Afolabi, Temitope Theophilus, Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Sobri, Shafreeza, Calin, Recep
Published 2017

Controlling the sintering response in the development of multilayered components produced via powder injection molding route—a review

by Ojo-Kupoluyi, Oluwatosin Job, Mohd Tahir, Suraya, Dele-Afolabi, Temitope Theophilus, Anuar, Mohd Shamsul
Published 2020

Factors affecting the quality of technical processes training

by Jaafar, Che Nor Aiza, As'arry, Azizan, Ismail, Rezawati, Zainol, Ismail, T-Dele-Afolabi, Temitope
Published 2021

Influence of multi-walled carbon nanotubes on melting temperature and microstructural evolution of Pb-free Sn-5Sb/Cu solder joint

by Theophilus, Dele-Afolabi Temitope, Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Mohamed Yusoff, Hamdan, Mohd Tahir, Suraya
Published 2015

Agro-waste shaped porous Al2O3/Ni composites: corrosion resistance performance and artificial neural network modelling

by Mohamed Ariff, Azmah Hanim, Zahari, Nur Ismarrubie, Sobri, Shafreeza, Mazlan, Norkhairunnisa, Dele-Afolabi, Temitope Theophilus, Calin, Recep
Published 2018

Tensile strength and corrosion resistance properties of porous Al2O3/Ni composites prepared with rice husk pore-forming agent

by Dele-Afolabi, Temitope Theophilus, Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Sobri, Shafreeza, Calin, Recep, Zahari, Nur Ismarrubie
Published 2018

Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish

by Dele-Afolabi, Temitope T., Hanim, M. A. Azmah, Vidyatharran, K., Amin Matori, Khamirul Amin, O. Saliza, Azlina, Recep, Çalin
Published 2022

An investigation of production and properties of RHA reinforced hybrid composites by vacuum infiltration method

by Tanaay, Naci Arda, Okur, Onur, Duran, Osman, Yilmaz, Erkan, Turkumen, Mustafa, Mohamed Ariff, Azmah Hanim, Dele-Afolabi, Temitope Theophilus, Calin, Recep
Published 2021

The effect of heat treatment on hardness properties and microstructure of 9Cr-Mo-V T91 alloy steel

by Jaafar, Che Nor Aiza, Saleh, Mat Husin, Noraslan, Nurul Zawanah, Zainol, Ismail, Md Rezali, Khairil Anas, Anene, Franklin, Dele-Afolabi, Temitope Theophilus
Published 2022

Process optimization of superior biosorption capacity of biogenic oyster shells nanoparticles for Congo red and Bromothymol blue dyes removal from aqueous solution: Response surfac...

by Adeleke, Abdulrahman Oyekanmi, Omar, R.C., Katibi, Kamil Kayode, Dele-Afolabi, Temitope T., Ahmad, Akil, Quazim, Junaid Olawale, Amusa, Abiodun A., Alshammari, Mohammed B.
Published 2024

Mechanical properties of longitudinal basalt/woven-glass-fiber-reinforced unsaturated polyester-resin hybrid composites

by Salit, Mohd Sapuan, H. S., Aulia, Rushdan, Ahmad Ilyas, A., Atiqah, Theophilus, Dele-Afolabi Temitope, Norizan, Mohd Nurazzi, A. B. M., Supian, Mahamud, Siti Nur Atikah
Published 2020