Use of wire mesh-epoxy composite for strengthening concrete beams /Ismail M. I. Qeshta

by Ismail, M. I. Qeshta
Published 2014

Outlier evaluation for the bilinear time series model.

by Mohamed, I.B., Ismail, M.I.
Published 2008

Thermal analysis on a weld joint of aluminium alloy in gas metal arc welding

by Ismail, M. I. S., Afieq, W. M.
Published 2016

Mechanical behaviour of support system for cold-formed steel channel stub column

by Sani, M. S. H. M., Muftah, F., Ismail, M. I., Tan, C. S.
Published 2017

Effects of ECAR process on the mechanical properties of explosively welded Al/ Cu/Al

by Ghaffari, Sina, Tahir, Suraya, Mohamed Ariff, Azmah Hanim, Ismail, M. I. S.
Published 2022

Vibration detection in water pipelines leakage using wireless three-axis accelerometer sensor

by Ismail, M. I. M., Dziyauddin, R. A., Ahmad, N. A., Ahmad, N.
Published 2018

The role of exploratory data analysis (EDA) in electricity forecasting

by Ismail, Suzilah, Zulkifli, Malina, Mansor, Rosnalini, Mat Yusof, Muhammad, Ismail, M. I
Published 2016

Current sheet axial dynamics of 2.5-kJ KSU-DPF under high-pressure regime

by Mohamed, A. E, Abdou, A. E, Ismail, M. I, Lee, S., Saw, S. H.
Published 2012

Effect of modifier on mechanical properties of aluminium silicon carbide (Al-SiC) composites

by Sulaiman, S., Marjom, Z., Ismail, M. I. S., Ariffin, M. K. A., Ashrafi, N.
Published 2017

Fuel consumption evaluation of SI engine using start-stop technology

by Abas, M. A., Wan Salim, W. S., Ismail, M. I., Rajoo, S., Martinez-Botas, R.
Published 2017

A study on wear failure analysis of tungsten carbide hardfacing on carbon steel blade in a digester tank

by Nagentrau, M., Mohd Tobi, A. L., Kamdi, Z., Ismail, M. I., Sambu, M.
Published 2017

Microstructure analysis of tungsten carbide hardfacing on carbon steel blade

by Nagentrau, M., Mohd Tobi, A.L., Kamdi, Z., Ismail, M. I., Sambu, M.
Published 2017

Fuel consumption evaluation of SI engine using start-stop technology

by Abas, M.A., Wan Salim, W.S., Ismail, M.I., Rajoo, S., Martinez-Botas, R.
Published 2017

Simulation Investigation on Multiphase Kick Behavior and Kick Tolerance for Highly Deviated Fractured Basement Reservoirs

by Sharafaddin, O., Ismail, M.I., Halafawi, M., Sirajuddin, M.S., Naji, G.M.A.
Published 2021

Preliminary results of Kansas State University dense plasma focus

by Abdou, A. E, Ismail, M. I, Mohamed, A. E, Lee, S., Saw, S. H., Verma, R.
Published 2012

Numerical analysis of laser heating for laser assisted micro milling application

by Mohid, Z., Warap, N. M., Hassan, S., Ismail, M.I.S., Ibrahim, R., A. Rahim, E.
Published 2014

Pesticidal prospectives of azadirachtin indica as home pest management / Mohd Fazi M.H … [et al.]

by Mohd Fazi, M.H, Shahrom, M.S, Abd Wahid, S.N, Zaharudin, F, Ismail, M.I

Partial discharge characteristics of natural rubber blends with inorganic nanofiller as electrical insulating material

by Arief, Y. Z., Ismail, M. I., Makmud, M. Z. H., Aulia, Adzis Z., Muhamad, N. A.
Published 2013

Improvement on the innovational outlier detection procedure in a bilinear model

by Mohamed .I.B, Ismail .M.I, Yahya .M.S, Hussin .A.G, Mohamed .N, Zaharim .A, Zainol .M.S
Published 2011

Slicer method comparison using open-source 3D printer

by Mohd Ariffin, M K A, Sukindar, Nor Aiman, Baharudin, B.T. H T, Jaafar, C N A, Ismail, M I S
Published 2018