Simulation and modeling of mixture formation under variant ambient condition and injection pressure of biodiesel spray

by Andsaler, Adiba Rhaodah, Khalid, Amir, Jaat, Norrizam
Published 2017

Influences of ambient temperature, injection pressure and spray characteristics on ignition delay and combustion process of palm oil and waste cooking oil

by Nursal, Ridwan Saputra, Jaat, Norrizam, Khalid, Amir, Ishak, Izuan Amin
Published 2024

Effects of ambient temperature and injection pressure on biodiesel ignition delay

by Jaat, Norrizam, Khalid, Amir, Andsaler, Adiba Rhaodah, Sapit, Azwan, Razali, Azahari, Basharie, Mariam
Published 2017

The effect of nozzle diameter, injection pressure and ambient temperature on spray characteristics in diesel engine

by Andsaler, Adiba Rhaodah, Khalid, Amir, Abdullah, Nor Sharifhatul Adila, Sapit, Azwan, Jaat, Norrizam
Published 2017

Autoignition behavior and emission of biodiesel from palm oil, waste cooking oil, tyre pyrolysis oil, algae and jatropha

by Nursal, Ridwan Saputra, Khalid, Amir, Abdullah, Iqbal Shahridzuan, Jaat, Norrizam, Darlis, Nofrizalidris, Koten, Hasan
Published 2021

Occupational safety and health practice: a study at quarry site by using hirarc form

by Tan, Jedidiah, Oh, Kar Heng, Dhat run @ Chat run, Virakphon, Khalid, Amir, Jaat, Norrizam
Published 2020

Identifying of the fuel-air mixing, mixture formation, ignition and combustion characteristic in the combustion chamber

by Zainal, Rabi’atulawwaliah, Saiful Azam, Syafiqah Ruqaiyah, Khalid, Amir, Jaat, Norrizam, Amirnordin, Shahrin Hisham
Published 2020

Occupational safety and health practice: a study at rubber manufacturing industry by using hirarc

by Ramli, Mohamad Najmi, Ahmad Jais, Mohamad Harizat, Khalid, Amir, Jaat, Norrizam, Manshoor, Bukhari, Noranai, Zamri
Published 2020

Hazard identification, risk assessment and risk control: a study at construction site

by Abd Latip, Muhammad Faris, Abdullah, Muhammad Arif, Khalid, Amir, Jaat, Norrizam, Ngadiron, Zuraidah, Zaman, Izzuddin
Published 2020

Energy from organic sources

by Mohd Noor, Warda Hanani, Mohmad Jaat, Norrizam, Khalid, Amir, Leman, Abdul Mutalib, Mohamed Sunar, Norshuhaila
Published 2020

Comparision on dynamic behavior of diesel spray and rapeseed oil spray in diesel engine

by Sapit, Azwan, Razali, Mohd Azahari, Hushim, Mohd Faisal, Jaat, Norrizam, Mohammad, Akmal Nizam, Khalid, Amir
Published 2017

Experiment on the effects of storage duration of biodiesel produced from crude palm oil, waste cooking oil and Jatropha

by Nanihar, Nadiarulah, Khalid, Amir, Mustaffa, Norrizal, Jaat, Norrizam, Sapit, Azwan, Razali, Azahari, Mohamed Sunar, Norshuhaila
Published 2017

Hazards and incident investigation at palm oil mill industry

by Chen, Chit Wee, Ting, Joseph Zhi Ho, Mahmood, Salwa, Khalid, Amir, Jaat, Norrizam, Basharie, Siti Mariam
Published 2020

Effect of ambient temperature on ignition delay, combustion process and emission of biodiesel derived from algae

by Khalid, Amir, Nursal, Ridwan Saputra, Jacob, Deden Witarsyah, Jaat, Norrizam, Mohamed Sunar, Norshuhaila, Amirnordin, Shahrin Hisham
Published 2018

Simulation and modelling of spray characteristics, spray penetration length and injection pressure of biodiesel

by Mohd Yaacob, Nur Syuhada, Khalid, Amir, Jaat, Norrizam, Andsaler, Adiba Rhaodah, Azizul, Muhamad Asri, Sapit, Azwan
Published 2024

Simulation and modelling of spray characteristics, spray penetration length and injection pressure of biodiesel

by Mohd Yaacob, Nur Syuhada, Khalid, Amir, Jaat, Norrizam, Andsaler, Adiba Rhaodah, Azizul, Muhamad Asri, Sapit, Azwan
Published 2024

Simulation and modelling of spray characteristics, spray penetration length and injection pressure of biodiesel

by Mohd Yaacob, Nur Syuhada, Khalid, Amir, Jaat, Norrizam, Rhaodah Andsaler, Adiba, Azizul, Muhamad Asri, Sapit, Azwan
Published 2024

Hazard identification, risk assessment and risk control: a study at precision part manufacturing industry

by Misran, Amirul Faiz, Yahya, Muhammad Alief Ikhram, Mahmood, Salwa, Khalid, Amir, Jaat, Norrizam, Razali, Azahari, Noranai, Zamri
Published 2020

Hazard identification, risk assessment and risk control: a study at food manufacturing industry

by Othman, Amiruddin, Nazri, Ahmad Nazirul, Birahim, Muhamad Fikri Shahkhirin, Khalid, Amir, Jaat, Norrizam, Sapit, Azwan, Razali, Azahari
Published 2020

Analysis of the effect of injection pressure on ignition delay and combustion process of biodiesel from palm oil, algae and waste cooking oil

by Anas, Mohd Irham, Khalid, Amir, Zulkifli, Fathul Hakim, Jaat, Norrizam, Hushim, Mohd Faisal, Manshoor, Bukhari, Zaman, Izzuddin
Published 2017