Strain rate-dependent deformation and failure process of adhesive joints

by Johar, M., Asasaari, S. F. M., Tamin, M. N.
Published 2015

Moisture absorption and tensile behaviour of hybrid carbon/flax composites

by Johar, M., Chong, W. W. F., Wong, K. J.
Published 2023

Interfacial shear strength characterisation of alkali treated bamboo bundle\x96polyester composites using an improved technique

by Khoo, S. J., Johar, M., Low, K. O., Wong, K. J.
Published 2017

Interfacial shear strength characterisation of alkali treated bamboo bundle–polyester composites using an improved technique

by Khoo, S. J., Johar, M., Low, K. O., Wong, K. J.
Published 2017

Effect of strain-rate and moisture content on the mechanical properties of adhesively bonded joints

by Johar, M., Wong, K. J., Rashidi, S. A., Tamin, M. N.
Published 2020

Numerical simulation methodology for mode II delamination of quasi-isotropic quasi-homogeneous composite laminates

by Johar, M., Israr, H. A., Low, K. O., Wong, K. J.
Published 2017

A further generalized thickness-dependent non-Fickian moisture absorption model using plain woven epoxy composites

by Johar, M., Kang, H. S., Chong, W. W. F., Wong, K. J.
Published 2018

Mode I and mode II delamination of a chopped strand mat E-glass reinforced vinyl ester composite

by Johar, M., Low, K. O., Israr, H. A., Wong, K. J.
Published 2018

Interlaminar fracture toughness of a plain weave flax/epoxy composite

by Rajendran, T. S., Johar, M., Low, K. O., Abu Hassan, S., Wong, K. J.
Published 2019

Effects of moisture absorption on the different modes of carbon/epoxy composites delamination

by Johar, M., Chong, W. W. F., Kang, H. S., Wong, K. J.
Published 2019

Moisture absorption effects on the mechanical properties of carbon/epoxy composites

by Mad Asasaari, S. F., Wong, K. J., Tamin, M. N., Johar, M.
Published 2020

Influence of water absorption on Mode I delamination in carbon/epoxy composite laminates

by Wong, K. J., Johar, M., Gong, X. J., Aivazzadeh, S., Tamin, M. N.
Published 2015

Displacement rate dependence of acrylic adhesive bonded carbon/epoxy composite joints under mode I loading

by Mohd. Jailani, M. H., Johar, M., Gan, K. W., Wong, K. J.
Published 2020

Buckling of imperfect cone-cylinder transition subjected to external pressure

by Ifayefunmi, Olawale, Ismail, Mohd Shahrom, Sheikh Md Fadzullah, Siti Hajar, Johar, M
Published 2020

Effects of different lay angles on characteristic fatigue responses of steel wire ropes

by Kamarudin, M., Ahmad, Z., Sung, A. N., Johar, M., Tamin, M. N.
Published 2022

Mode I delamination behaviour of carbon/epoxy composite at different displacement rates

by Low, K. O., Teng, S. M., Johar, M., Israr, H. A., Wong, K. J.
Published 2019

Characterization of interface damage of fiber-reinforced polymer composite laminates under mode I loading

by Khan, S. A., Wong, K. J., Sung, A. N., Johar, M., Tamin, M. N.
Published 2022

Mechanical characterization of aluminum 7075 using digital image correlation and finite element method

by Ariff, I. M., Ahmad, Z., Sung, A. N., Johar, M., Tamin, M. N.
Published 2022

Flow analysis of intake port geometry of spark ignition engine using simulation

by Johar, M. A. M., Said, M. F. M., Abas, M. A., Latiff, Z. A., Ali, M. F., Ibrahim, N. M. I. N.
Published 2019

Investigation of single stub on circular polarized patch antenna at 2.4ghz

by Aziz, M. Z. A. A., Mufit, N. A. A., Suaidi, M. K., Othman, M. A., Johar, M. F., Hassan, N., Rahim, M. K. A.
Published 2013