Effects Of Clay Modification And Compatibilizers On The Mechanical, Morphological, And Thermal Properties Of Polyamide 6/Polypropylene Nanocomposites [TN941. K97 2008 f rb].

by Kusmono, Kusmono
Published 2008

Effect of Clay Addition on Mechanical Properties of Unsaturated Polyester/Glass Fiber Composites

by Kusmono, Kusmono, Mohd Ishak, Zainal Arifin
Published 2013

STUDI STRUKTUR MIKRO PADUAN BAJA TAHAN KARAT AUSTENITIK TIPE 25CR35NI1NB-TI/ZR HASIL UJI STRESS RUPTURE

by KUSMONO

Isolation and Properties of Cellulose Nanocrystals Fabricated by Ammonium Persulfate Oxidation from Sansevieria trifasciata Fibers

by Indirasetyo, Nafiis Lazuardi, Kusmono, Kusmono
Published 2022

Isolation and Characterization of Nanocrystalline Cellulose from Ramie Fibers via Phosphoric Acid Hydrolysis

by Kusmono, Kusmono, Affan, M. N.
Published 2020

Production of cellulose nanocrystals extracted from Pennisetum purpureum fibers and its application as a lubricating additive in engine oil

by Aryasena, Rajendra, Kusmono, Kusmono, Umami, Nafiatul
Published 2022

Effect Of Organoclay Modification On The Mechanical, Morphology, And Thermal Properties Of Injection Molded Polyamide 6/Polypropylene/Montmorillonite Nanocomposites.

by Mohd Ishak, Z.A., Kusmono, Kusmono, W, S Chow, Takeichi, T, Rochmadi, Rochmadi
Published 2008

Mechanical, morphological, and thermal characteristics of epoxy/glass fiber/cellulose nanofiber hybrid composites

by Azhary, Taufik, Kusmono, Kusmono, Wildan, Muhammad Waziz, Herianto, Herianto
Published 2022

The effect of repeated alkali pretreatments on the morphological characteristics of cellulose from oil palm empty fruit bunch fiber-reinforced epoxy adhesive composite

by Sukmawan, Romi, Kusmono, Kusmono, Rahmanta, Anugrah Perdana, Saputri, Lestari Hetalesi
Published 2022

Enhanced fatigue performance of tandem MIG 5083 aluminium alloy weld joints by heat sink and static thermal tensioning

by Ilman, M.N., Kusmono, Kusmono, Muslih, M.R., Triwibowo, N.A., Sehono, Sehono
Published 2022

PENGARUH KUAT ARUS, WAKTU PELAPISAN DAN JENIS LARUTAN TERHADAP KEKERASAN, LAJU KOROSI DAN KETEBALAN LAPISAN HASIL ELECTROPLATING NIKEL PADA ALUMINIUM

by , Reny Afriany, , Dr. Kusmono, S.T., M.T
Published 2013

PENGARUH SUHU TEMPER PADA PROSES AUSTEMPERING TERHADAP STRUKTUR MIKRO DAN SIFAT MEKANIS BAJA BAINITIK NIR KARBIDA (CARBIDE-FREE BAINITIC STEEL) UNTUK BAJA TAHAN PELURU

by , AJI DANANJAYA, , Dr. Kusmono, S.T., M.T.
Published 2014

PENGARUH KOMPOSISI DAN UKURAN SERBUK BRIKET YANG TERBUAT DARI BATUBARA DAN JERAMI PADI TERHADAP KARAKTERISTIK PEMBAKARAN

by , DIDIK SUGIYANTO, , Dr. Kusmono, ST., MT.
Published 2014

PENGARUH KOMPOSISI LARUTAN, VARIASI ARUS DAN WAKTU PROSES PELAPISAN CHROME PADA PLASTIK ABS TERHADAP SIFAT MEKANIS

by , AHMAD ZOHARI, , Dr. Kusmono, S.T., M.T.
Published 2013

STUDI SIFAT MEKANIK KOMPOSIT HIBRID UNSATURATED POLYESTER/CLAY/SERAT GELAS

by , HUSAINI, ST., , Bapak Dr. Kusmono, ST., MT
Published 2012

STUDI SIFAT MEKANIK KOMPOSIT HIBRID EPOKSI/CLAY/SERAT GELAS

by , Heribertus Sukarja, ST, , Dr. Kusmono, ST., MT.
Published 2012

STUDI SIFAT FISIS DAN MEKANIS KOMPOSIT TAMBAL GIGI KOMERSIAL

by , AL ICHLAS IMRAN, , Dr. Kusmono, S.T., M.T.
Published 2014

ANALISA KEGAGALAN POROS DAN MECHANICAL SEAL POMPA SENTRIFUGAL

by , TITO RIZAL PRABOWO, , Dr. Kusmono, S.T., M.T.
Published 2013

PREPARATION AND PROPERTIES OF PA6/PP/ORGANOCLAY NANOCOMPOSITES OBTAINED BY MELT COMPOUNDING

by , Kusmono, Z.A. Mohd Ishak, W.S. Chow, T. Takeichi, Rochmadi
Published 2007

PENGARUH PENAMBAHAN NIKEL TERHADAP STRUKTUR MIKRO DAN SIFAT MEKANIS PADA BAJA BAINITIK NIR KARBIDA UNTUK APLIKASI BAJA TAHAN PELURU

by , GABRIELLY H.D NABABAN, , Bapak Dr. Kusmono, ST.,MT.
Published 2014