A comprehensive review on the application of nanofluids in the machining process

by Kumaran, Kadirgama
Published 2021

Nanocoolant alternative for cooling elements by UMP researchers

by Kumaran, Kadirgama, Devarajan, Ramasamy
Published 2020

The trend of 3D Printing in higher TVET skill level

by Kumaran, Kadirgama, Wan Sharuzi, Wan Harun
Published 2020

The trend of 3D printing in higher level TVET skill

by Kumaran, Kadirgama, Wan Sharuzi, Wan Harun
Published 2020

A Global Outreach by two Malaysians Success Story Unveiled

by Kumaran, Kadirgama, Wan Sharuzi, Wan Harun
Published 2020

Direct metal laser sintering technology for the Manufacture of fully porous functionally graded Titanium alloy femoral stems (fabrication and designing of fully porous functionally...

by Kumaran, Kadirgama, Rahman, M. M., Wan Sharuzi, Wan Harun

Nano-structured diamond & silica coatings on CO-CR-MO substrate for biomedical application

by Kumaran, Kadirgama, Rahman, M. M., Wan Sharuzi, Wan Harun

Analysis on the Performance of Designed Fluidized Bed Dryer for Drying Coffee Beans

by Kavin, Klinsman Konsil, Norazlianie, Sazali, Kumaran, Kadirgama, Norazwina, Zainol
Published 2023

Experimental investigation and prediction model for mechanical properties of copper-reinforced polylactic acid composites (Cu-PLA) using FDM-based 3D printing technique

by Arvind, Kottasamy, Mahendran, Samykano, Kumaran, Kadirgama, Rahma, Mustafizur, Muhamad, Mat Noor
Published 2021

Energy consumption, environmental impact, and implementation of renewable energy resources in global textile industries: an overview towards circularity and sustainability

by Kaniz, Farhana, Kumaran, Kadirgama, Mahamude, Abu Shadate Faisal, Mushfika, Tasnim Mica
Published 2022

Fundamental study of hybrid graphene oxide and nanofibrillated cellulose for aircraft wings application

by Kumaran, Kadirgama, Rahman, M. M., Devarajan, Ramasamy, Mahendran, Samykano, Jose, Rajan

Analysis of Correlation of Induced Frequency and Cream Skimming Efficiency through Ultrasonic Technology

by Arjun, Asogan, Norazlianie, Sazali, Wan Sharuzi, Wan Harun, Devarajan, Ramasamy, Kumaran, Kadirgama
Published 2023

Effects of printing parameters on the mechanical characteristics and mathematical modeling of FDM-printed PETG

by Rajan, Kumaresan, Mahendran, Samykano, Kumaran, Kadirgama, Adarsh, Kumar Pandey, Md Mustafizur, Rahman
Published 2023

Phase change materials and nano-enhanced phase change materials for thermal energy storage in photovoltaic thermal systems: a futuristic approach and its technical challenges

by Reji Kumar, Rajamony, Mahendran, Samykano, Kumaran, Kadirgama, Pandey, Adarsh Kumar, Tyagi, V. V.
Published 2020

Effects of minimum quantity lubrication technique in different machining processes - a comprehensive review

by Wajiha Tasnim, Urmi, Rahman, Md Mustafizur, Wahaizad, Safiei, Kumaran, Kadirgama, Md Abdul, Maleque
Published 2022

Fused deposition modeling: process, materials, parameters, properties, and applications

by Kumaresan, Rajan, Mahendran, Samykano, Kumaran, Kadirgama, Wan Sharuzi, Wan Harun, Rahman, Md. Mustafizur
Published 2022

Modeling and engine performance of direct injection Hydrogen fueled engine

by Md.Mustafizur, Rahman, Mohammed K., Mohammed, Rosli, A. Bakar, Muhamad, Mat Noor, Kumaran, Kadirgama
Published 2009

A short review of nano-cellulose preparation from textile spinning waste cotton

by Mahamude, Abu Shadate Faisal, Wan Sharuzi, Wan Harun, Kumaran, Kadirgama, Farhana, Kaniz, Devarajan, Ramasamy
Published 2021

Numerical Studies of Graphene Hybrid Nanofluids in Flat Plate Solar Collector

by Mahamude, Abu Shadate Faisal, Wan Sharuzi, Wan Harun, Kumaran, Kadirgama, Farhana, Kaniz, Devarajan, Ramasamy
Published 2021

Development of compressive-shear test rig for polymeric foam material behavior

by Mohd Ruzaimi, MatRejab, Kumaran, Kadirgama, Muhamad, Mat Noor, Mohd Shahrir, Mohd Sani, A.Alias
Published 2009