Professorial lecture UiTM: fatigue life monitoring of fighter airplanes / Wahyu Kuntjoro

by Kuntjoro, Wahyu
Published 2019

Inspection - Hole shape optimization of a lower wing panel based on geomatric boundary shapes / Wahyu Kuntjoro and Zon S. Hernedhi

by Kuntjoro, Wahyu, Hernedhi, Zon S.
Published 2004

An analysis of stress over riveted repair on a stiffened panel / Ramyzan Ramly and Wahyu Kuntjoro

by Ramly, Ramyzan, Kuntjoro, Wahyu
Published 2005

Failure analysis of fiber reinforced composite materials used in Malaysian industries / Jamaluddin Mahmud, Wahyu Kuntjoro and Aidah Jumahat

by Mahmud, Jamaluddin, Kuntjoro, Wahyu, Jumahat, Aidah
Published 2007

Stability augmentation for longitudinal modes of a small blended wing-body aircraft with canard as control surface / Rizal Effendy Mohd Nasir and Wahyu Kuntjoro

by Mohd Nasir, Rizal Effendy, Kuntjoro, Wahyu
Published 2013

Mechanical and thermal properties of LENR modified epoxy composite / Mohammed Abdullahi Abu Bakar, Wahyu Kuntjoro and S Ahmad

by Abu Bakar, Mohammed Abdullahi, Kuntjoro, Wahyu, Ahmad, S.
Published 2011

Optimization of truss structures based on member dispositions / Associate Prof. Dr. Wahyu Kuntjoro and Jamaluddin Mahmud

by Kuntjoro, Wahyu (Associate Prof. Dr.), Mahmud, Jamaluddin
Published 2005

Honeycomb carbon sandwich composite panel under compressive load flat-wise: experimental analysis / Ramzyzan Ramly...[et al.]

by Ramly, Ramzyzan, Kuntjoro, Wahyu, Ab Ghani, Amir Radzi
Published 2020

Experimental Investigation on the Ballistic Resistance of Aluminium Plate under High Velocity Impact / Mohd Rozaiman Aziz ...[et al.]

by Aziz, Mohd Rozaiman, Kuntjoro, Wahyu, Natarajan, Valliyappan David
Published 2018

Bending collapse of closed-hat-section beams. Part I: Development and validation of finite element models / Hafizan Hashim...[et al.]

by Hashim, Hafizan, Ab.Ghani, Amir Radzi, Kuntjoro, Wahyu
Published 2017

Development of on-line mechanical engineering design and manufacturing process / Juri Saedon ... [et al.]

by Saedon, Juri, Kuntjoro, Wahyu, Omar, Abdul Rahman, Mahmud, Jamaluddin
Published 2007

Design parameters for the development of wing test rig for static test experiment / Ramzyzan Ramly … [et_al.]

by Ramly, Ramzyzan, Kuntjoro, Wahyu, Wisnoe, Wirachman, M Nasir, Rizal Effendy
Published 2010

Fatigue life monitoring program of RMAF MiG-29 / Wahyu Kuntjoro ... [et al.]

by Kuntjoro, Wahyu, Bahari, Ibrahim, Ujang, Abdul Ghani, M Mydin, Assanah
Published 2008

A new fuel cell powered aerospace propulsion system / Thomas Arthur Ward … [et al.]

by Thomas, Arthur Ward, Ow, Chee Sheng, Kuntjoro, Wahyu, Omar, Ahmad Maliki, Wahab, Nor'aini
Published 2010

Virtual manufacturing for prediction of Martensite Formation and Hardness Value induced by Laser Welding Process using Subroutine Algorithm in MSC Marc/Mentat / Omar Yahya...[et al...

by Yahya,, Omar, HP Manurung, Yupiter, Sulaiman,, Mohd Shahar, Prajadhiana,, Keval, Omar, Abdul Rahman, Kuntjoro, Wahyu
Published 2018

The Effect of Elevons Deflection to Aerodynamic Coefficients of A Tail-less Blended Wing-Body Planform / Rizal E. M. Nasir ...[et al.]

by M. Nasir, Rizal E., Basri, Ilyas H., M. Ahmad, Aiman, A. Latif, Zulfazli A., Wisnoe, Wirachman, Kuntjoro, Wahyu
Published 2017

Comparison on the aerodynamic coefficients obtained from three different size of wind tunnel model on Baseline V set at 45 degree sweep tail angle

by Abd. Latif, Mohamad Zulfazli Arief, Mohd. Nasir, Rizal Effendy, Ahmad, Muhammad Aiman, Wisnoe, Wirachman, Kuntjoro, Wahyu, Ishak, Iskandar Shah, Saad, M. R. S.
Published 2018

Comparative Distortion Analysis of Welded T-Joint between 2D-Shell and 3D-Solid Element using FEA with Experimental Verification / Keval. P Prajadhiana...[et al.]

by P Prajadhiana, Keval., Manurung, Yupiter HP, Zainir, Muhammad Zohdi, Yahya, Omar, Saedon, Juri, Shahriman, Mohd, Omar, Abdul Rahman, Kuntjoro, Wahyu, Kasim, Khairulnizam, Ishak, Dendi P., Bauer, Alexander, Graf, Marcel
Published 2018