Solid-state recycling of light metals: A review

by Shamsudin, Shazarel, Lajis, M. A., Zhong, Zhao Wei
Published 2016

Parametric optimisation of heat treated recycling aluminium (AA6061) by response surface methodology

by Yusuf, N. K., Ahmad, A., Lajis, M. A., Shamsudin, S., Zhong, Zhao Wei
Published 2018

Direct recycling of aluminium 6061 chip through cold compression

by Chan, B.L., Lajis, M.A.
Published 2015

The influences of various mixed dielectric fluids on the performance electrical discharge machining of AISI D2 hardened steel

by Lajis, M.A., Hosni, N.A.J.
Published 2018

Conjectured the behaviour of a recycled metal matrix composite (MMC-AlR) developed through hot press forging by means of 3D FEM simulation

by Ahmad, A., Lajis, M.A., Shamsudin, S., Yusuf, N.K.
Published 2018

Conjectured the behaviour of a recycled metal matrix composite (MMC-AlR) developed through hot press forging by means of 3D FEM simulation

by Ahmad, A., Lajis, M.A., Shamsudin, S., Yusuf, N.K.
Published 2018

A Method and an Apparatus for Machining a Tool Steel

by Amin, A. K. M. Nurul, Lajis, M. A., Ismail, Ahmad Faris
Published 2014

Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2

by Amin, A. K. M. Nurul, Dolah, Shuriani, Mahmud, Marlina, Lajis, M. A.
Published 2008

Multi-criteria optimization in end milling of AISI D2 hardened steel using coated carbide inserts

by Karim, A.N. Mustafizul, Lajis, M.A., Amin, A. K. M. Nurul
Published 2011

Tool wear and surface roughness aspects in heat assisted end milling of AISI D2 hardened steel

by Amin, A. K. M. Nurul, Lajis, M. A., Karim, A.N. Mustafizul
Published 2011

Development of tool life prediction model of TiAlN coated tools during the high speed hard milling of AISI H13 steel

by Amin, A. K. M. Nurul, Hafiz, A.M. Khalid, Lajis, M. A.
Published 2011

Modeling of surface roughness during end milling of AISI H13 hardened tool steel

by Amin, A. K. M. Nurul, Hafiz, A.M. Khalid, Lajis, M. A.
Published 2011

Modelling and optimization of tool life in end milling of AISI 02 hardened steel

by Lajis, M. A., Karim, A.N. Mustafizul, Amin, A. K. M. Nurul
Published 2008

Effects of workpiece preheating on surface roughness, chatter and tool performance during end milling of hardened steel D2

by Amin, A. K. M. Nurul, Dolah, Shuriani, Mahmud, Marlina, Lajis, M. A.
Published 2008

Damage characteristics of recycled aluminium alloys AA6061 undergoing finite strain deformation of tensile loading

by Ho, C. S., Mohd Nor, M. K., Lajis, M. A., A. Samad, M. S.
Published 2022

Mechanical properties of recycled aluminium chip reinforced with alumina (Al2O3) particle

by Lajis, M. A., Ahmad, A., Yusuf, N.K., Azami, A. H., Wagiman, A.
Published 2017

Prediction of tool life and experimental investigation during hot milling of AISI H13 tool steel

by Amin, A. K. M. Nurul, Hafiz, A.M.K., Lajis, M.A., Patwari, Anayet U.
Published 2010

Modeling in preheated machining of AISI D2 hardened steel

by Lajis, M. A., Amin, A. K. M. Nurul, Karim, A.N. Mustafizul, Ginta, Turnad Lenggo
Published 2011

Tool Life Prediction by Response Surface Methodology for End Milling Titanium Alloy Ti-6Al-4V Using PCD Inserts

by Ginta , Turnad L., Amin, A. K. M. Nurul, Karim, A.N. Mustafizul, Lajis, M. A.
Published 2008

Hot machining in end milling of hardened steel AISI D2

by Lajis, M. A., Amin, A. K. M. Nurul, Karim, A.N. Mustafizul, Ginta, Turnad Lenggo
Published 2008