Estimation of thermal contact conductance value between boron steel blank and tool surface at different value of applied pressure in hot stamping process

by Mohd Ali Hanafiah, Shaharudin
Published 2014

Numerical Model of Heat Transfer Coefficient in Hot Stamping Process

by Mohd Ali Hanafiah, Shaharudin, Zahari, Taha
Published 2017

Using Finite Element simulation to investigate the effect of cutting edge radius on burr formation for inclined dimple milling operation

by Mohd Ali Hanafiah, Shaharudin, Ahmad Razlan, Yusoff
Published 2023

Experimental and Simulation Approach; Investigation Effect of Axial Feed Rate to the Cutting Force in Dimple Milling Using Ball End Mill Tool

by Mohd Ali Hanafiah, Shaharudin, A. R., Yusoff
Published 2023

Influence of cutting parameters to surface area roughness in dimple machining using milling process

by Mohd Ali Hanafiah, Shaharudin, A. R., Yusoff, Amir, Aziz
Published 2021

Influences of Varying Combination of Feed Rate and Depth of Cut to Tool Wear Rate and Surface Roughness: High Speed Machining Technique in Non-High Speed Milling Machine

by Mohd Zairulnizam, Mohd Zawawi, Mohd Ali Hanafiah, Shaharudin, Ahmad Rosli, Abdul Manaf
Published 2014

Development of a soccer ball launching device

by Mohd Hasnun Arif, Hassan, Zahari, Taha, Mohd Ali Hanafiah, Shaharudin, Lim, Kok Wee, Zulfika, Anuar
Published 2018

Comparison of Cooling Performance Between High Thermal Conductivity Steel (HTCS 150) and Hot Work Tool Steel (SKD 61) Insert for Experimental Tool Using Finite Element Analysis

by Mohd Fawzi, Zamri, Zahari, Taha, A. R., Yusoff, Mohamad Farid, Mohamad Sharif, Mohd Ali Hanafiah, Shaharudin
Published 2014

Match outcomes prediction of six top English Premier League clubs via machine learning technique

by Rabiu Muazu, Musa, Anwar, P. P. Abdul Majeed, Mohd Azraai, M. Razman, Mohd Ali Hanafiah, Shaharudin
Published 2018

The Effect of Heat Treatment on The Hardness and Impact Properties of Medium Carbon Steel

by Nurul Aida, Amir Khatif, Mohamad Aliff Kamil, Awang Kecik, Mohd Ali Hanafiah, Shaharudin, A. K., Prasada Rao, Noor Mazni, Ismail
Published 2015

Integrated multi sensors and camera video sequence application for performance monitoring in archery

by Zahari, Taha, Jessnor Arif, Mat-Jizat, Muhammad Amirul, Abdullah, Mohamad Razali, Abdullah, Musa, Rabiu Muazu, Mohamad Fauzi, Ibrahim, Mohd Ali Hanafiah, Shaharudin
Published 2017

Feasibility Study of Wafer Scale Laser Assisted Thermal Imprinting of Glass Nanostructures

by Lee, Helen, Syarifah Nur Hasanah, Syed Kamarudin, Ismayuzri, Ishak, Ahmad Rosli, Abdul Manaf, Ahmad Shahir, Jamaludin, Mohd Ali Hanafiah, Shaharudin, Mohd Zairulnizam, Mohd Zawawi
Published 2021

Rapid Direct Continuous Method for Hot Embossing of Glass Microlens Array Combined with CO2 Laser Irradiation and External Preheating/Cooling

by Syarifah Nur Hasanah, Syed Kamarudin, Lee, Helen, Ismayuzri, Ishak, Ahmad Rosli, Abdul Manaf, Ahmad Shahir, Jamaludin, Mohd Ali Hanafiah, Shaharudin, Mohd Zairulnizam, Mohd Zawawi
Published 2021

The identification and control of a finger exoskeleton for grasping rehabilitation

by Zahari, Taha, Muhammad Muaz, Alim, Anwar, P. P. Abdul Majeed, Muhammad Aizzat, Zakaria, Mohd Azraai, Mohd Razman, Mohd Ali Hanafiah, Shaharudin, M. H. A., Hassan
Published 2018