Experimental investigation of minimum quantity lubricant (MQL) in cold forward extrusion

by Mohd. Jamir, Mohd. Ridzuan
Published 2010

Pyrolysis of rice straw by using microwave irradiation with quartz glass reactor

by Azduwin, Khasri, Zarina, Z., Mohd Jamir, Mohd Ridzuan, Anis Atikah, Ahmad
Published 2019

Environmentally approach for enhancing tribological characteristics in metal forming: A review

by Ahmad, Noor Afifah, Samion, Syahrullail, Abd. Rahim, Erween, Mohd. Jamir, Mohd. Ridzuan
Published 2020

Experimental evaluation of palm oil as lubricant in cold forward extrusion process

by Samion, Syahrullail, Bahak, Mohd. Zubil, Che Sidek, Nor Azwadi, Mohd. Jamir, Mohd. Ridzuan
Published 2011

Effect of extrusion ratio on paraffinic mineral oil lubricant in cold forward extrusion

by Sulaiman, Mohd. Hafis, Mohd. Jamir, Mohd. Ridzuan, Wan Nordin, Imaduddin Helmi, Samion, Syahrullail
Published 2012

The effects of alkali treatment on the mechanical and morphological properties of Pennisetum purpureum/glass-reinforced epoxy hybrid composites

by Mohd Jamir, Mohd Ridzuan, Abdul Majid, Mohd Shukry, Sulaiman, Mohd Hafis, Khasri, Azduwin
Published 2017

Manufacturing strategies and tribology of tailored tool surface topographies for enhanced lubrication in metal forming

by Sulaiman, Mohd Hafis, R.N, Farahana, Mohd Jamir, Mohd Ridzuan, Mohammad Jaafar, Muhammad Hasnulhadi
Published 2019

Isolation and characterisation of cellulose from cortex, pith and whole of the Pennisetum purpureum: Effect of sodium hydroxide concentration

by Tuan Rohadi, Tuan Nurain, Mohd Jamir, Mohd Ridzuan, Abdul Majid, Mohd Shukry, Sulaiman, Mohd Hafis
Published 2020

Influence of cellulose filler extracted from napier grass on thermal characterizations, moisture content, tensile strength, biodegradation, and morphological structure of bioplasti...

by Rohadi, T. N.Tuan, Mohd Jamir, Mohd Ridzuan, Abdul Majid, M. S., Mamat, Normahira, Sulaiman, M.H.
Published 2022

Analysis and physicochemical properties of cellulose nanowhiskers from Pennisetum purpureum via different acid hydrolysis reaction time

by E.F., Sucinda, Abdul Majid, Mohd Shukry, Mohd Jamir, Mohd Ridzuan, Hameed Sultan, Mohamed Thariq, A.G., Gibson
Published 2020

Preparation and Performance Test of PEFB Reinforced Box Waste Coated Superhydrophobic Coating for Shoe Sole Application

by Marsi, Noraini, Chow, Li Kien, A Rani, Juhari, Main, Nor Mazlana, Mohd Jamir, Mohd Ridzuan, Shaari, Muhammad Farid
Published 2020

Enhancing physical, mechanical, tribological and contact characteristics of water-based lubrication using ceramic nanomaterials MgO and SiC for metal-to-metal sliding interfaces

by Leong, Ming Rui, Sulaiman, Mohd Hafis, Azizan Ashman, Muhammad Ashman Hakimi, Ibrahim, Muhammad Shuhaimi, Mohd Jamir, Mohd Ridzuan
Published 2023

The effect of stacking sequence and ply orientation on the mechanical properties of pineapple leaf fibre PALF/carbon hybrid laminate composites

by Rabani Hashim, Mohd Khairul, Abdul Majid, Mohd Shukry, Mohd Jamir, Mohd Ridzuan, Kasim, Farizul Hafiz, Hameed Sultan, Mohamed Thariq
Published 2021

Friction and wear characteristics of furcraea foetida fiber-reinforced epoxy composites

by Hussain, Haja Syed, Mohd Jamir, Mohd Ridzuan, Abdul Majid, Mohd Shukry, Sapuan, S. M., Yudhanto, Ferriawan, Nugroho, Aris Widyo, Rani, Muhammad Faiz Hilmi
Published 2023

Evaluation of physical properties of autoclaved aerated concrete (AAC) based glass-gypsum waste into concrete / Izzati Abdul Manaf … [et al.]

by Abdul Manaf, Izzati, Marsi, Noraini, Yusrianto, Efil, Salamat, Muhammad Hafifi Daniel, Kassim, Noraniah, Awang, Mariah, Shariff, Hafizuddin Hakim, Mohd Jamir, Mohd Ridzuan, Ali, Roslinda
Published 2022

Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication

by Sharuddin, Muhammad Hazman, Sulaiman, Mohd Hafis, Kamaruddin, Shafie, Dahnel, Aishah Najiah, Abd Halim, Nor Farah Huda, Mohd Jamir, Mohd Ridzuan, Abdul-Rani, Ahmad Majdi
Published 2023

Dielectric and biodegradation properties of biodegradable nano-hydroxyapatite/starch bone scaffold

by Beh, Chong Youa, Cheng, Ee Meng, Mohd Nasir, Nashrul Fazli, Mohd Tarmizi, Emma Ziezie, Khor, Shing Fhan, Eng, Swee Kheng, Abdul Majid, Mohd Shukry, Mohd Jamir, Mohd Ridzuan
Published 2022

Regression analysis of the dielectric and morphological properties for porous nanohydroxyapatite/starch composites: a correlative study

by Beh, Chong You, Cheng, Ee Meng, Mohd Nasir, Nashrul Fazli, Abdul Majid, Mohd Shukry, Khor, Shing Fhan, Mohd Jamir, Mohd Ridzuan, Mohd Tarmizi, Emma Ziezie, Lee, Kim Yee
Published 2022

Friction and wear characteristics of Furcraea foetida fiber-reinforced epoxy composites

by Syed Hussain, Haja, Mohd. Jamir, Mohd. Ridzuan, Abdul Majid, Mohd. Shukry, Salit, Mohd. Sapuan, Ferriawan Yudhanto, Ferriawan Yudhanto, Aris Widyo Nugroho, Aris Widyo Nugroho, Rani, Muhammad Faiz Hilmi
Published 2023

Fracture risk prediction on children with osteogenesis imperfecta subjected to loads under activity of daily living

by Wanna, S B C, Basaruddin, Khairul Salleh, Mat Som, Mohd Hanafi, Sulaiman, Abdul Razak, Awang, Mohd Shukrimi, Mohamad Khan, Shah Fenner Khan, Abdul Majid, Mohd Shukry, Mohd Jamir, Mohd Ridzuan
Published 2018