An automatic portable preassure testing RIG to determine the performance of the GRE composite pipes under various stress ratios

by Mohd Shukry, Abdul Majid, Dr.
Published 2014

The effects of varying target hardness on ricochet angle

by Mohd Shukry, Abdul Majid, Birch, Robert S., Jais, M. I.
Published 2009

Electrical properties investigation of unsaturated polyester resin with carbon black as fillers

by R., Revati, Shuhaida, Yahud, Dr., Mohd Shukry, Abdul Majid, Dr.
Published 2014

Effect of adhesive thickness on adhesively bonded T-joint

by A. R., Abdullah, Mohd Afendi, Rojan, Dr., Mohd Shukry, Abdul Majid, Dr.
Published 2014

Experimental studies of a Ranque-Hilsch vortex tube

by Azizul, Mohamad, Nasrul Amri, Mohd Amin, Zuradzman, Mohamad Razlan, Mohd Shukry, Abdul Majid
Published 2014

Stress analysis and failure characterizations of v-shaped epoxy adhesively bonded joint

by Mohd Afendi, Rojan, Dr., Mohd Shukry, Abdul Majid, Ruslizam, Daud, Ishino, Y., Teramoto, Tokuo
Published 2013

Mathematical model of elastic crack interaction and two-dimensional finite element analysis based on griffith energy release rate

by Ruslizam, Daud, Ahmad Kamal, Ariffin, Shahrum, Abdullah, Mohd Shukry, Abdul Majid, Mohd Afendi, Rojan, Dr.
Published 2013

Effects of winding angles in biaxial ultimate elastic wall stress (UEWS) tests of glass fibre reinforced epoxy (GRE) composite pipes

by Mohd Shukry, Abdul Majid, Mohd Afendi, Rojan, Dr., Ruslizam, Daud, Gibson, A. G., M., Hekman
Published 2013

The behavior of Projectile Ricochet off various wooden targets

by Mohd Shukry, Abdul Majid, Birch, Robert S., M.I. Jais, Mohd Noor Arib, Md Rejab, Hafizawati, Zakaria
Published 2008

The behavior of Projectile Ricochet off various wooden targets

by Mohd Shukry, Abdul Majid, Birch, Robert S., M.I. Jais, Mohd Noor Arib, Md Rejab, Hafizawati, Zakaria
Published 2008

Damage detection in steel plates using discrete cosine transformation techniques and artificial neural network

by Paulraj, M.P., Mohd Shukry, Abdul Majid, Sazali, Yaacob, Mohd Hafiz, Fazalul Rahiman, R Pranesh, Krishnan
Published 2009

Stress analysis and failure characterizations of V-shaped epoxy adhesively bonded joint

by Mohd Afendi, Rojan, Dr., Mohd Shukry, Abdul Majid, Dr., Ruslizam, Daud, Dr., Ishino, Y., Teramoto, Tokuo
Published 2014

Steel plate damage diagnosis using probabilistic neural network

by Paulraj, Murugesa Pandiyan, Prof. Dr., Sazali, Yaacob, Prof. Dr., Mohd Shukry, Abdul Majid, Dr., Krishnan, Pranesh
Published 2014

Application of frame energy based DCT moments for the damage diagnosis in steel plates using FLNN

by Paulraj, Murugesa Pandiyan, Prof. Dr., Sazali, Yaacob, Prof. Dr., Mohd Shukry, Abdul Majid, Dr., Krishnan, Pranesh
Published 2014

Prediction of Reverberation time in university classrooms using Neural Network

by Paularaj, M. P., Mohd Shukry, Abdul Majid, Sazali, Yaacob, Hariharan, M., Wan Mohd Ridzuan, Wan Ab Majid
Published 2009

Effects of winding angles in biaxial ultimate elastic wall stress (UEWS) tests of glass gibre reinforced epoxy (GRE) composite pipes

by Mohd Shukry, Abdul Majid, Dr., Mohd Afendi, Rojan, Dr., Ruslizam, Daud, Dr., Gibson, A. G., M., Hekman
Published 2014

Effect of nano-clay and their dispersion techniques on compressive properties of unsaturated polyester resin

by Fartini, Mohd Suhut, Mohd Shukry, Abdul Majid, Dr., Mohd Afendi, Rojan, Dr., Ruslizam, Daud, Dr., Azizul, Mohamad
Published 2014

Motorbike engine faults diagnosing system using neural network

by Paulraj, Murugesa Pandiyan, Prof. Dr., Mohd Shukry, Abdul Majid, Dr., Sazali, Yaacob, Prof. Dr., Zin, M.Z.M.
Published 2014

Strength of three-point-bending ductile adhesive joint with dissimilar adherent

by Siti Nurhashima, Mohd Afendi, Rojan, Dr., Nasrul Amri, Mohd Amin, Dr., Mohd Shukry, Abdul Majid, Dr., M.Taufik
Published 2014

Effect of pineapple leaf (PALF), napier, and hemp fibres as filler on the scratch resistance of epoxy composites

by Mohd Ridzuan, Mohd Jamir, Mohd Shukry, Abdul Majid, Azduwin, Khasri, E.H.D. Gan, Zuradzman, Mohamad Razlan‬, S., Syahrullail
Published 2020