Preventing delayed cracks in SUS304 deep drawn cups using extreme blank holding forces aided by nanolubrication

by Tan, Chin Joo, Ibrahim, Muhammad Shafiq, Muhamad, Mohd Ridha
Published 2019

A review on nanomaterials reinforcement in friction stir welding

by Raja, Sufian, Muhamad, Mohd Ridha, Jamaludin, Mohd Fadzil, Yusof, Farazila
Published 2020

N95 respirator hybrid decontamination method using Ultraviolet Germicidal Irradiation (UVGI) coupled with Microwave-Generated Steam (MGS)

by Gopalan, Thirumaaran, Muhamad, Mohd Ridha, Hoe, Victor Chee Wai, Hassandarvish, Pouya
Published 2024

N95 respirator hybrid decontamination method using Ultraviolet Germicidal Irradiation (UVGI) coupled with Microwave-Generated Steam (MGS)

by Gopalan, Thirumaaran, Muhamad, Mohd Ridha, Hoe, Victor Chee Wai, Hassandarvish, Pouya
Published 2024

Enhancements on dissimilar friction stir welding between AZ31 and SPHC mild steel with Al-Mg as powder additives

by Muhamad, Mohd Ridha, Raja, Sufian, Jamaludin, Mohd Fadzil, Yusof, Farazila, Morisada, Yoshiaki, Suga, Tetsuo, Fujii, Hidetoshi
Published 2021

Computer aided investigation on the effect of internal surface micro grooving for enhanced thermal management of heat exchanger

by Eid, Mohamed Moustafa Abdelhalim Ahmed, Mohd Zubir, Mohd Nashrul, Muhamad, Mohd Ridha Bin, Newaz, Kazi Md. Salim
Published 2021

Friction stir alloying of AZ61 and mild steel with Al-CNT additive

by Raja, Sufian, Muhamad, Mohd Ridha, Yusof, Farazila, Jamaludin, Mohd Fadzil, Suga, Tetsuo, Liu, Huihong, Morisada, Yoshiaki, Fujii, Hidetoshi
Published 2022

Delayed fracture stress thresholds degraded by the shear punching process in ultra-high-strength steel sheets: Analysis using an in-plane bending test with numerical assimilation

by Matsuno, Takashi, Ueda, Yuya, Takahashi, Tomoya, Hama, Takayuki, Hojo, Tomohiko, Shibayama, Yuki, Muhamad, Mohd Ridha, Okitsu, Yoshitaka, Takamura, Masato
Published 2024

Effects of friction stir processing and nano-hydroxyapatite on the microstructure, hardness, degradation rate and in-vitro bioactivity of WE43 alloy for biomedical applications

by Wu, Bo, Yusof, Farazila, Li, Fuguo, Miao, Huan, Bushroa, A. R., Muhamad, Mohd Ridha, Badruddin, Irfan Anjum, Ibrahim, Mahmoud Z.
Published 2024

Technological development of evaporative cooling systems and its integration with air dehumidification processes: A review

by Abdullah, Shekh, Mohd Zubir, Mohd Nashrul Mohd, Muhamad, Mohd Ridha, Newaz, Kazi Md Salim, Oztop, Hakan F., Alam, Md Shadab, Shaikh, Kaleemullah
Published 2023

Influence of friction stir processing parameters on microstructure, hardness and corrosion resistance of biocompatible Mg alloy WE43

by Wu, Bo, Yusof, Farazila, Li, Fuguo, Abdul Razak, Bushroa, Muhamad, Mohd Ridha, Badruddin, Irfan Anjum, Hussien, Mohamed, Kamangar, Sarfaraz, Ibrahim, Mahmoud Zakaria
Published 2024

Experimental Analysis of the Improvement of Heat Transfer in Tube Heat Exchangers Via Passive Flow Generators Using Wire Coil Inserts

by Ibrahim, Farah Arina, Muhamad, Mohd Ridha, Mohd Zubir, Mohd Nashrul, Omar, Mohd, Siri, Zailan, Hasan, Rony Mehedy, Eid, Mohamed Moustafa Abdelhalim Ahmed
Published 2024

Formation and influencing mechanism of the intermetallic compound in the friction stir welding of immiscible AZ31 and SPHC steel using aluminium powder as an additive

by Raja, Sufian, Yusof, Farazila, Muhamad, Mohd Ridha, Mansor, Muhammad Safwan Mohd, Juri, Azib, Wu, Bo, Jamaludin, Mohd Fadzil, Ansari, Nooruddin, Ren, James
Published 2024

Decontamination methods of N95 respirators contaminated with SARS-CoV-2

by Gopalan, Thirumaaran, Mohd Yatim, Rabi'atul `Adawiyah, Muhamad, Mohd Ridha, Mohamed Nazari, Nor Shafina, Hashim, N. Awanis, John, Jacob, Wai Hoe, Victor Chee
Published 2021

Friction stir alloying of AZ61 and mild steel with Cu-CNT additive

by bin Ariffin, Mohammad Ashraf, bin Muhamad, Mohd Ridha, Raja, Sufian, Jamaludin, Mohd Fadzil, Yusof, Farazila, Suga, Tetsuo, Liu, Huihong, Morisada, Yoshiaki, Fujii, Hidetoshi
Published 2022

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies

by Mansor, Muhammad Safwan Mohd, Raja, Sufian, Yusof, Farazila, Muhamad, Mohd Ridha, Manurung, Yupiter HP., Adenan, Mohd Shahriman, Hussein, Nur Izan Syahriah, Ren, James
Published 2024

Recent research progress in friction stir welding of aluminium and copper dissimilar joint: A review

by Isa, Mohammad Syahid Mohd, Moghadasi, Kaveh, Ariffin, Mohammad Ashraf, Raja, Sufian, Muhamad, Mohd Ridha, Yusof, Farazila, Jamaludin, Mohd Fadzil, Yusoff, Nukman, Ab Karim, Mohd Sayuti
Published 2021

The influence of reinforcement particles friction stir processing on microstructure, mechanical properties, tribological and corrosion behaviors: A review

by Wu, Bo, Ibrahim, Mahmoud Zakaria, Raja, Sufian, Yusof, Farazila, Bushroa, Abdul Razak, Muhamad, Mohd Ridha, Huang, Rongxue, Zhang, Yun, Badruddin, Irfan Anjum, Hussien, Mohamed, Kamangar, Sarfaraz
Published 2022

Passive heat transfer augmentation in conduits by surface modification: A review

by Eid, Mohamed Moustafa Abdelhalim Ahmed, Zubir, Mohd Nashrul Mohd, Muhamad, Mohd Ridha Bin, Newaz, Kazi Md. Salim, Ahmadi, Goodarz, Rony, Md. Mehedy Hasan, Ibrahim, Farah Arina, Alam, Md Shadab, Abdullah, Shekh
Published 2022

Friction stir alloying AZ61 magnesium alloy and mild steel with Zn-CNT additive

by Mohd Jamil, Muhammad Zulhiqmi, Isa, Mohammad Syahid Mohd, Raja, Sufian, bin Muhamad, Mohd Ridha, Yusof, Farazila, Hasnan, Hijaz Kamal, Jamaludin, Mohd Fadzil, Brytan, Zbigniew, Liu, Huihong, Suga, Tetsuo, Morisada, Yoshiaki, Fujii, Hidetoshi
Published 2024