A Novel Approach to The Fabrication of Aluminium Foam Through Pressure Assisted High-Frequency Induction Heated Sinterin2 Dissolution Process (P ASDP)

by MUSTAPHA, MAZLI
Published 2010

Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process

by Mustapha, Mazli, Mamat, Othman, Hussain, P
Published 2010

The Empirical Relationship Between Relative Electrical Conductivity And Relative Density Of The Al-Foam Fabricated Through Pressure Assisted Sintering/Dissolution Process

by Mamat, Othman, Mustapha, Mazli, Ismail, Fauzi
Published 2009

Empirical Relationship Between Relative Electrical Conductivity And Relative Density Of The Al-Foam Fabricated Through Pressure Assisted Sintering/Dissolution Process

by Mamat, Othman, Hussain, P, Mustapha, Mazli, Ismail, Fauzi
Published 2008

Fe-Al Diffusion Bonding: Effect of reaction time on the interlayer thickness / Asmawi Ismail...[et al.]

by Ismail, Asmawi, Hussain, Patthi, Mustapha, Mazli, Nuruddin, Muhd Fadhil
Published 2018

Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process

by Mustapha, Faizal, Mustapha, Mazli, Mamat, Othman, Hussain, P, Noorsal, Kartini
Published 2010

Effects of processing parameters for vacuum-bagging-only method on shape conformation of laminated composites

by Mujahid, Yasir, Sallih, Nabihah, Mustapha, Mazli, Abdullah, Mohamad Zaki, Mustapha, Faizal
Published 2020

Study on adhesive and microstructure properties of rice husk ash-based geopolymer hybrid alkyd coating

by Abdullah, Mohd Náim, Mustapha, Faizal, Mustapha, Mazli, Khan, Tabrej, Sebaey, Tamer A
Published 2024

Carbothermal nitridation process of mechanically milled silica sand using Taguchi's method

by Mustapha, Mazli, Othman, E. Abu, Norsal, K., Mustapha, Faizal, Mamat, Othman, Ramesh, Singh
Published 2013

The effect of residual solvent in carbon−based filler reinforced polymer coating on the curing properties, mechanical and corrosive behaviour

by Othman, Nurul Husna, Mustapha, Mazli, Sallih, Nabihah, Ahmad, Azlan, Mustapha, Faizal, Che Ismail, Mokhtar
Published 2022

Life Cycle Assessment and Economic Analysis of a Vapor Compression System Integrated with a Large District Cooling Plant

by Amin Abd Majid, Mohd, Cyril Hampo, Chima, Bt Akmar, Ainul, Haji Ya, Hamdan, Mustapha, Mazli
Published 2022

Statistical review of microstructure-property correlation of stainless steel: implication for pre- and post-weld treatment

by Muhammed, Musa, Mustapha, Mazli, Ginta, Turnad Lenggo, Ali, Abdullah Musa, Mustapha, Faizal, Hampo, Chima Cyril
Published 2020

Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process

by Mustapha, Faizal, Mustapha, Mazli, Noorsal, Kartini, Mamat, Othman, Hussain, Patthi, Ahmad, Faiz, Muhamad, Norhamidi, Mohamed Haris, Sallehuddin
Published 2010

Damage identification on impact and lightning damage of flax composite laminates (Linum usitatissimum) using long-pulse thermography of a low-resolution infrared camera

by Anwar, Murniwati, Mustapha, Faizal, Hameed Sultan, Mohamed Thariq, Abdul Halin, Izhal, Abdullah, Mohd Na'im, Hassim, Mohamad Iswady, Mustapha, Mazli
Published 2021

Mechanical performance and corrosion behaviour of diffusion-bonded A5083 aluminium and A36 mild steel with gallium interlayer

by Ismail, Asmawi, Othman, Nurul Husna, Mustapha, Mazli, Mohamed Saheed, Mohamed Shuaib, Abdullah, Zaki, Muhammed, Musa, Mohamed Saat, Asmalina, Mustapha, Faizal
Published 2022

Advancements in aluminum matrix composites reinforced with carbides and graphene: a comprehensive review

by Alam, Mohammad Azad, Ya, Hamdan B., Azeem, Mohammad, Mustapha, Mazli, Yusuf, Mohammad, Masood, Faisal, Marode, Roshan Vijay, Sapuan, Salit Mohd, Ansari, Akhter Husain
Published 2023

Growth of NGVs and Comparative Study of Cylinder Material for CNG Storage

by Azeem, Mohammad, Haji Ya, Hamdan, Azad Alam, Mohammad, Sadique, Md Rehan, Mustapha, Mazli B, Akmar Bin Mokhtar, Ainul, Ahmed, Tauseef, Sultan, Mohamed Thariq Hameed, Khan, Rehan
Published 2022