Computational studies of fuel and air mixing characteristics of a low pressure domestic gas appliance

by Mustafa, A., Nasri, N. S.
Published 2003

Structural analysis of NGVM pressure regulator via FEA

by Mohsin, R., Nasri, N. S., Kefly, F.
Published 2008

Autothermal reforming of methane to hydrogen in a palladium membrane reactor: characterization of bimetallic Pt-NiO/delta-Al2O3 catalyst

by Songip, Ahmad Rahman, Nasri, N. S., Jungan, J.
Published 2004

Characterization Of Bimetallic Pt-Ni/d-A1203 Catalyst For Autothermal Reforming Of Methane

by Songip, A.R., Nasri, N.S., Jungan, J.
Published 2004

Characterization of CoNi-Sn catalyst for autothermal reforming of methane

by Songip, A. R., Nasri, N. S., Kusworo, T. D., Ismail, S. R.
Published 2004

The characterization of Ni- and Co-based catalysts for autothermal reforming process

by Songip, A. R., Nasri, N. S., Latiff, M. H. A.
Published 2004

Characterization of CoNI-Sn catalyst for autothermal reforming methane

by Songip, Ahmad Rahman, Nasri, N. S., Tutuk, D. K., Ismail, S. R.
Published 2004

Simulation Study Of Methane Autothermal Reforming For Hydrogen Production

by Shukri, M.I., Songip, A.R., Ahmad, A., Nasri, N.S.
Published 2004

Overall performance of domestic gas meter operations

by Mohsin, R., Abd. Majid, Z., Nasri, N. S., Kiat, L. K.
Published 2008

Pressure drop performance in gas custody transfer through domestic gas meter operations

by Mohsin, R., Abd. Majid, Z., Nasri, N. S., Kiat, L. K.
Published 2008

Natural gas adsorption on biomass derived activated carbons: A mini review

by Hamza, U. D., Nasri, N. S., Mohammed, J., Majid, Z. A.
Published 2016

Safety and health issues during printing ink production process

by Othman, N., Lerk, L. L., Chelliapan, S., Mohammad, R., Nasri, N. S.
Published 2017

Surfactant alternating carbonated water injection (SACW) is a new process for enhanced oil recovery

by Aluhwal, O. K. H., Junin, R. B., Nasri, N. S. B.
Published 2017

Carbon-based adsorbents from used rubber slipper for dye removal

by Rajendaran, E., Zaini, M. A. A., Arsad, A., Nasri, N. S.
Published 2019

An investigation of a catalytically-ignited autothermal reformer pre-heating system for hydrogen production in a fuel cell powered vehicle

by Razak, M. M. A., Mustafa, A., Nasri, N. S., Songip, A. R.
Published 2003

Catalytic combustion of hydrogen and methane for autothermal reformer start-up ignition system

by Razak, M. M. A., Mustafa, A., Nasri, N. S., Songip, A.R
Published 2004

Rubber seed shell based activated carbon by physical activation for phenol removal

by Yan, K. Z., Zaini, M. A. A., Arsad, A., Nasri, N. S.
Published 2019

The characterization of Ni-based catalysts for autothermal reforming process

by Latiff, M. H. A., Songip, Ahmad Rahman, Nasri, N. S., Tutuk, D. K.
Published 2004

Microwave assisted K2CO3 palm shell activated carbon as sorbent for CO2 adsorption application

by Hamza, U. D., Nasri, N. S., Amin, N. A. S., Mohammed, J., Zain, H. M.
Published 2016

Adsorption isotherm breakthrough time of acidic and alkaline gases on treated porous synthesized KOH-FeCl3.6H2O sustainable agro-based material

by Nasri, N. S., Zain, H. M., Sidik, H. U., Abdulrasheed, A., Rashid, N. M.
Published 2017