Scientific assimilation in the interpretation of the qur’ān: an approach to zaghlūl el-najjār’s work entitled “tafsīr Al-Ayah Al-Kawnīyyah Fī Al-Qur’ān Al-Karīm” “Aplikasi eleme...

by Amir, S., Mohd Noor, M.M., Ahmad Hilmi, A.B.
Published 2012

Characterisation of plasticised PVDF-HFP polymer electrolytes

by Majid, Siti Rohana, Arof, Abdul Kariem, Noor, M.M., Careem, M.A.
Published 2011

Performance of carbide cutting tools when machining of nickel based alloy

by Noor M.M., Kadirgama K., Habeeb H.H., Rahman M.M., Mohammad B.
Published 2023

Investigation of dispersion, stability, and tribological performance of oil-based graphene and copper nanofluids

by Amirruddin, A. K., Rahman, M. M., Noor, M. M., Ramasamy, D., Harun, W. S W

Strain rate effects of polymeric foam cores under compressive loading / Rejab, M.R.M. …[et al.]

by Rejab, M.R.M, Tarmidi, N.U.A., Zuki, N.M., Noor, M.M.
Published 2008

A brief review on thermal behaviour of PANI as additive in heat transfer fluid

by Sofiah, A. G. N., Samykano, M., Shahabuddin, S., Kadirgama, K., Pandey, A. K., Noor, M. M.
Published 2021

Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method

by Ramasamy, D., Samykano, M., Kadirgama, Kumaran, Lee, Giok Chui, Noor, M. M., Mahdhir, Mohd Yusof
Published 2010

Parametric optimisation of supercritical CO2 thermal-hydraulic characteristics in microchannels using response surface methodology

by Rao, N.T., Oumer, A. N., Noor, M. M., Kadirgama, K., Basrawi, F., Siregar, J. P.
Published 2023

Aspects of wear mechanisms of carbide tools when machine Hastelloy C-22HS

by Kadirgama K., Noor M.M., Abou-El-Hossein K.A., Mohammad B., Habeeb H.H.
Published 2023

Tool life and wear mechanism when machining Hastelloy C-22HS

by Kadirgama K., Abou-El-Hossein K.A., Noor M.M., Sharma K.V., Mohammad B.
Published 2023

Transient in-cylinder gas flow characteristics of single cylinder port injection hydrogen fueled engine

by Rahman, MM, Hamada, Khalaf I, Noor, M.M, Maleque, Md. Abdul, A. Bakar, Rosli, Kadirgama, K.
Published 2010

Micro Combined Heat and Power to provide heat and electrical power using biomass and Gamma-type Stirling engine

by Damirchi, H., Najafi, G., Alizadehnia, S., Mamat, R., Nor Azwadi, C. S., Azmi, W. H., Noor, M. M.
Published 2016

In-cylinder heat transfer characteristics of hydrogen fueled engine: a steady state approach

by Rahman, Md. Mustafizur, Hamada, Khalaf I, Noor, M.M, Bakar, Rosli A., Kadirgama, K., Maleque, Md. Abdul
Published 2010

Finite element based fatigue life prediction of cylinder head for two-stroke linear engine using stress-life approach

by Rahman , M.M., Hamada, Khalaf I, Noor, M.M., Bakar, Rosli A., Kadirgama, K., Maleque, Md. Abdul
Published 2008

Investigation of micromachining of silicon using micro-EDM

by Samykano, M., Nagarajan, T., Majdi, ., Ramasamy, D., Kadirgama, Kumaran, Noor, M. M., Lee, Giok Chui, Mohd Fazli, Ismail
Published 2011

Mechanical behaviour of polymeric foam core at various orientation angles

by Abd Rahman, Alias, Rejab, M. R. M., Sani, M. S. M., Noor, M. M., Kadirgama, K., Rahman, M. M.
Published 2010

Heat transfer augmentation with aluminium oxide nanofluid in a plain tube and with inserts

by Viswanatha Sharma, Korada, Azmi, W. H., Bakar, R. A., Noor, M. M., Kadirgama, Kumaran, Reddy Prasad, D. M.
Published 2011

Performance of Dye-Sensitized solar cells with (PVDF-HFP)-KI-EC-PC electrolyte and different dye materials

by Noor, M.M., Buraidah, M.H., Yusuf, S.N.F., Careem, M.A., Majid, Siti Rohana, Arof, Abdul Kariem
Published 2011

Development of micro-EDM with microactuator feed control system

by Samykano, M., Rahman, M. M., Ramasamy, D., Kadirgama, Kumaran, Noor, M. M., Reza, M. S., Harun, W. S W, Rusli, Ghani
Published 2011

Machining of nickel alloy 242 with cubic boron nitride tools

by Habeeb H.H., Kadirgama K., Noor M.M., Rahman M.M., Mohammad B., Bakar R.A., Abouel Hossein K.A.
Published 2023