The effect of different stator slot size on flux and losses distribution in 0.5 hp induction motor

by Nor Shafiqin, Shariffuddin
Published 2014

Statistic data analysis of localized magnetic flux density and power loss

by Mastika, Abdullah, Ismail, Daut, Prof. Dr., Yanawati, Yahya, Nor Shafiqin, Shariffuddin, Pungut, Ibrahim
Published 2012

Epstein and iron loss test for Incoming Quality Assurance (IQA)

by Mastika, Abdullah, Ismail, Daut, Prof. Dr., Yanawati, Yahya, Nor Shafiqin, Shariffuddin, Pungut, Ibrahim
Published 2012

Loss prediction of induction motor using OPERA 2D software

by Ismail, Daut, Prof. Dr., Anayet, Karim, Pungut, Ibrahim, Yanawati, Yahya, Nor Shafiqin, Shariffuddin, Faizal
Published 2012

Effect of different size of rotor bars on induction motor efficiency

by Pungut, Ibrahim, Ismail, Daut, Prof. dr., Rosnazri, Ali, Yanawati, Yahya, Nor Shafiqin, Shariffuddin, Mastika, Abdullah
Published 2012

Performance comparison different thickness of non oriented electrical steel material using analysis and performance chart from FEM software

by Yanawati, Yahya, Ismail, Daut, Prof. Dr., Nair, Gomesh, Nor Shafiqin, Shariffuddin, Pungut, Ibrahim, M., Abdullah
Published 2012

Predicting an investigation of flux distribution in three phase induction motor stators by using different stator slot sizes

by Nor Shafiqin, Shariffuddin, Ismail, Daut, Prof. Dr., Yanawati, Yahya, Pungut, Ibrahim, M., Abdullah, Nair, Gomesh
Published 2012

In house construction of an induction motor rotor by using 0.35mm thickness of steel sheet for efficiency based investigation

by Ismail, Daut, Prof. Dr., Gomesh Nair, Shasidharan, Yanawati, Yahya, Muhammad Irwanto, Misrun, Nor Shafiqin, Shariffuddin
Published 2012

The impacts of stator outside diameters on induction motor nameplates: Analysis by using a finite element

by Ismail, Daut, Prof. Dr., Mastika, Abdullah, Gomesh Nair, Shasidharan, Yanawati, Yahya, Nor Shafiqin, Shariffuddin, Pungut, Ibrahim
Published 2012

The effect of different stator slot size on the stator copper loss

by Nor Shafiqin, Shariffuddin, Ismail, Daut, Prof. Dr., Yanawati, Yahya, Pungut, Ibrahim, M., Abdullah, Nair, Gomesh, M., Asri
Published 2012

The impacts of stator materials on induction motor nameplate parameters for high performance

by Ismail, Daut, Prof. Dr., Mohd S Ezwan, Abdullah, Gomesh Nair, Shasidharan, Yanawati, Yahya, Nor Shafiqin, Shariffuddin, Pungut, Ibrahim
Published 2012

Power factor performance on 0.35 mm and 0.50 mm thicknesses of steel sheets for 0.5 Hp induction motor using FEM software

by Yanawati, Yahya, Nor Hanisah, Baharudin, Tunku Muhammad Nizar, Tunku Mansur, Syatirah, Mohd Noor, Nor Shafiqin, Shariffuddin, Pungut, Ibrahim, Ir.
Published 2014

Fabrication and investigation of copper rotor bar on 0.5HP induction Motor-A performance and economical study

by Ismail, Daut, Prof. Dr., Gomesh Nair, Shasidharan, Yanawati, Yahya, Nor Shafiqin, Shariffuddin, Muhammad Irwanto, Misrun, Mohd Irwan, Yusoff, Anayet, Karim
Published 2012

Predicting the localized flux distribution in three phase induction motor between different stator slot size

by Ismail, Daut, Prof. Dr., Dina Maizana, Maiz Ahmad, Dr., Nor Shafiqin, Shariffuddin, Nasrul Helmei, Halim, Yanawati, Y., Mohd Asri, Jusoh, Gomesh Nair, Shasidharan, Pungut, Ibrahim, Abdullah, M., Syatirah, M. N.
Published 2011