Experimental and numerical analysis of fatigue life of aluminum Al 2024-T351 at elevated temperature

by Mazlan, Shahan, Yidris, Noorfaizal, Seyed Saeid, Rahimian Koloor, Petrů, Michal
Published 2020

Numerical prediction of residual stresses distribution in thin-walled press-braked stainless steel sections

by Mutafi, Ayad, Yidris, Noorfaizal, Koloor, Seyed Saeid Rahimian, Petrů, Michal
Published 2020

Isolation and characterization of a novel bacterium from the marine environment for trichloroacetic acid bioremediation

by Heidarrezaei, Mahshid, Shokravi, Hoofar, Huyop, Fahrul, Koloor, Seyed Saeid Rahimian, Petru, Michal
Published 2020

Mechanical, morphological, and fracture-deformation behavior of MWCNTs-reinforced (Al-Cu-Mg-T351) alloy cast nanocomposites fabricated by optimized mechanical milling and powder me...

by Sharma, Shubham, Patyal, Vikas, Sudhakara, P., Singh, Jujhar, Petru, Michal, Rushdan, Ahmad Ilyas
Published 2022

Vehicle-assisted techniques for health monitoring of bridges

by Shokravi, Hoofar, Shokravi, Hooman, Bakhary, Norhisham, Heidarrezaei, Mahshid, Koloor, Seyed Saeid Rahimian, Petru, Michal
Published 2020

Analytical prediction of highly sensitive CNT-FET-based sensor performance for detection of gas molecule

by Hosseingholipourasl, Ali, Syed Ariffin, Sharifah Hafizah, Koloor, Seyed Saeid Rahimian, Petru, Michal, Hamzah, Afiq
Published 2020

Moisture absorption effects on mode II delamination of carbon/epoxy composites

by Wong, King Jye, Johar, Mahzan, Koloor, Seyed Saeid Rahimian, Petru, Michal, Tamin, Mohd. Nasir
Published 2020

Delamination and manufacturing defects in natural fiber-reinforced hybrid composite: a review

by M. J., Suriania, Rapi, Hannah Zalifah, Ilyas, R. A., Petrů, Michal, Salit, Mohd Sapuan
Published 2021

Effect of chemically treated kenaf fibre on mechanical and thermal properties of PLA composites prepared through fused deposition modeling (FDM)

by Jamadi, Aida Haryati, Razali, Nadlene, Petru, Michal, Mohammad Taha, Mastura, Muhammad, Noryani, Rushdan, Ahmad Ilyas
Published 2021

Representative cell analysis for damage-based failure model of polymer hexagonal honeycomb structure under the out-of-plane loadings

by Khan, Muhammad Salman, Abdul Latif, Ainullotfi, Koloor, Seyed Saeid Rahimian, Petru, Michal, Tamin, Mohd. Nasir
Published 2021

An energy-based concept for yielding of multidirectional FRP composite structures using a mesoscale lamina damage model

by Koloor, Seyed Saeid Rahimian, Karimzadeh, Atefeh, Yidris, Noorfaizal, Petrů, Michal, Ayatollahi, Majid Reza, Tamin, Mohd Nasir
Published 2020

Flammability, tensile and morphological properties of oil palm empty fruit bunches fibre/ pet yarn reinforced epoxy fibre retardant hybrid polymer composites

by M. J., Suraini, Mohd Radzi, Fathin Sakinah, R. A., Ilyas, Petrů, Michal, Salit, Mohd Sapuan, C. M., Ruzaidi
Published 2021

Role of YSZ particles on microstructural, wear, and corrosion behavior of Al-15%Mg2Si hybrid composite for marine applications.

by Ghandvar, Hamidreza, Jabbar, Mostafa Abbas, Petrů, Michal, Abu Bakar, Tuty Asma, Ler, Lim Jia, Rahimian Koloor, Seyed Saeid
Published 2023

An insight from nature: honeycomb pattern in advanced structural design for impact energy absorption.

by Mohammadi, Hossein, Ahmad, Zaini, Petru, Michal, Mazlan, Saiful Amri, Faizal Johari, Mohd. Aidy, Hatami, Hossein, Rahimian Koloor, Seyed Saeid
Published 2023

Displacement rate effects on the mode II shear delamination behavior of carbon fiber/epoxy composites

by Low, Kean Ong, Johar, Mahzan, Israr, Haris Ahmad, Gan, Khong Wui, Koloor, Seyed Saeid Rahimian, Petru, Michal, Wong, King Jye
Published 2021

Kenaf fiber/pet yarn reinforced epoxy hybrid polymer composites: morphology, tensile and flammability properties

by M. J., Suriani, Zainudin, Hasliana Asyikin, Ilyas, R. A., Petrů, Michal, Salit, Mohd Sapuan, Ghazali, Che Mohd Ruzaidi, Mustapha, Rohani
Published 2021

Fourth generation biofuel from genetically modified algal biomass: challenges and future directions

by Shokravi, Hoofar, Shokravi, Zahra, Heidarrezaei, Mahshid, Ong, Hwai Chyuan, Rahimian Koloor, Seyed Saeid, Petru, Michal, Lau, Woei Jye, Ismail, Ahmad Fauzi
Published 2021

Lightweight glass fiber-reinforced polymer composite for automotive bumper applications: a review

by Mohammadi, Hossein, Ahmad, Zaini, Mazlan, Saiful Amri, Faizal Johari, Mohd. Aidy, Siebert, Geralt, Michal Petru, Michal Petru, Koloor, Seyed Saeid Rahimian
Published 2023

Micro- and nanocellulose in polymer composite materials: a review

by Omran, Abdoulhdi A. Borhana, Mohammed, Abdulrahman A. B. A., S., M. Sapuan, R., A. Ilyas, M. R., M. Asyraf, Seyed Saeid, Rahimian Koloor, Petrů, Michal
Published 2021

Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites

by Low, Kean Ong, Johar, Mahzan, Sung, Aun Naa, Mohd. Nasir, Mohd. Nazri, Koloor, Seyed Saeid Rahimian, Petru, Michal, Israr, Haris Ahmad, Wong, King Jye
Published 2022