Flexural strengthening of timber beams using carbon fibre reinforced polymer

by Yusof, A., Rahman, A. B.
Published 2017

The study on the impact of knowledge inertia on organization

by Shalikar, S., Lahoutpour, N., Rahman, A. B. A.
Published 2011

A comparative bond study of deformed steel bar in different concrete grades and concrete fiber

by Zaini-Rijal, Z., Rahman, A. B. A.
Published 2017

Information and communication technology (ICT) policy; significances, challenges, issues and future research framework

by Alighian, R., A. Rahman, A. B., Ibrahim, R. B.
Published 2011

Ductility factor of RC building frames with different infill wall configurations under low intensity far field earthquake effects

by Adnan, Azlan, Tiong, P. L. Y, Rahman, A. B. A
Published 2012

Experimental results on the shear behaviour of steel fibre self-compacting concrete (SFSCC) beams

by Lamide, J. A., Mohamed, R. N., Abd. Rahman, A. B.
Published 2016

Pullout behaviour of ribbed bars in self-compacting concrete with steel fibers

by Majain, N., Rahman, A. B., Adnan, A., Mohamed, R. N.
Published 2020

Effect of steel fibers on self-compacting concrete slump flow and compressive strength

by Majain, N., Rahman, A. B. A., Mohamed, R. N., Adnan, A.
Published 2019

Bond stress in grouted spiral connectors

by Abd. Rahman, A. B., Mahdinezhad, M., Ibrahim, I. S., Mohamed, R. N.
Published 2015

Experimental wind tunnel tests on a semi submersible-FPS platform

by Mansor, S., Wan Omar, W. Z., Ishak, I. S., Rahman, A. B., Mat Lazim, T.
Published 2011

Tensile capacity of grouted splice sleeves

by Ling, J. H., Abd. Rahman, A. B., Ibrahim, I. S., Abdul Hamid, Z.
Published 2016

An experimental study of welded bar sleeve wall panel connection under tensile, shear, and flexural loads

by Ling, J. H., Abd. Rahman, A. B., Ibrahim, I. S., Abdul Hamid, Z.
Published 2017

Effect of screw distance on combined profile cold form steel in increasing the compression member capacity

by Septiropa, Z., Osman, M. H., Abd. Rahman, A. B., Mohd. Ariffin, M. A.
Published 2019

Steel fibre self-compacting concrete under biaxial loading

by Mohamed, R. N., Zamri, N. F., Elliott, K. S., Rahman, A. B. A., Bakhary, N.
Published 2019

Electrical characteristics of doped ZnOCu2O heterojunction diode by sputtering method

by Abd Rahman, A.B., Alias, Afishah, Shain, F.L., Lam, W.Y., Mohamad, K.A.
Published 2018

An improved solar PV system for Malaysian rural electrification - Part II: Implementation and economic analysis of solar PV system with tracker and reflectors

by Malek N.B.Abd., Hasini H.B., Rahman A.B.Abd., Jaafar Mohd.N.B.Mohd.
Published 2023

Brick manufacturing practice in Bangladesh: a review of energy efficacy and air pollution scenarios

by Darain, Kh Mahfuz ud, Rahman, A. B. M. S., Ahsan, Amimul, Saiful Islam, A. B. M., Yusuf, Badronnisa
Published 2013

Profile of cold-formed steel for compression member design a basic combination performance

by Septiropa Z., Osman M.H., Rahman A.B.A., Ariffin M.A.M., Huda M., Maseleno A.
Published 2023

Investigation of BaTiO3 and TiO2 Based Nano-fillers on the Space Charge and Electrical Strength of Cross-linked Polyethylene (XLPE)

by Rahman A.B.A., Rahman M.S.A., Ariffin A.M., Ali N.H.N., Ghani A.B.A., Lau K.Y., Mohamad M.S., Osman M.
Published 2023

Influence of SiO2 and ZrO2 Nanocomposite on the AC Breakdown Strength of Cross-linked Polyethylene (XLPE)

by Rahman A.B.A., Rahman M.S.A., Ariffin A.M., Ali N.H.N., Ghani A.B.A., Lau K.Y., Mohamad M.S., Osman M.
Published 2023