Robot Manipulation Trajectory Planning in Complex Position

by Samin, Razali
Published 2002

Mechanical properties of the as-cast quartz particulate reinforced LM6 alloy matrix composites

by Sulaiman, Shamsuddin, Mohd Sayuti, Samin, Razali
Published 2008

Computational study of the effect of using open isogrids on the natural frequencies of a small satellite structure

by Dawood, Sarmad Daood Salman, Inayatullah, Othman, Samin, Razali
Published 2015

Prioritizing lean manufacturing practices in small to medium enterprises by applying TOPSIS in fuzzy environment

by Yamchello, Hamed Tamjid, Samin, Razali, Tamjidyamcholo, Alireza, Rashidi, Alireza
Published 2014

Structural analysis of brake disc using dynamic simulation

by Shahril, A., Samin, Razali, J. M., Juraidi, Daut, Jufriadi
Published 2015

Analysis of lake water for air conditioning: a case study in Faculty of Engineering, Universiti Putra Malaysia

by Rasin, Jaslin, Samin, Razali, Syed Ghazali Jalalulin, Syed Amirul Mustaqim
Published 2023

Research and modelling of surface roughness, cutting forces and I-kaz coefficients for S42C in turning using response surface methodology

by Samin, Razali, Nuawi, Mohd Zaki, A. Ghani, Jaharah, Mohamed. Haris, Sallehuddin
Published 2019

Development of an Educational Robotic Training Kit.

by Tang, Sai Hong, Sulaiman, Shamsuddin, Samin, Razali, Teo, Hiu Hong, Khaksar, Weria
Published 2013

A review of the critical success factors in the adoption of lean production system by small and medium sized enterprises

by Yamchello, Hamed Tamjid, Samin, Razali, Tamjidyamcholo, Alireza, Bareji, Pooyan, Beheshti, Abolghasem Kourank
Published 2014

A novel approach to human motion estimation with applications in human-robot safety

by Motlagh, O., Tang, Sai Hong, Ismail, Napsiah, Ramli, Abdul Rahman, Samin, Razali
Published 2008

A new path estimation strategy for predicting blind persons' motion in indoor environments

by Motlagh, Omid, Tang, Sai Hong, Ismail, Napsiah, Ramli, Abdul Rahman, Samin, Razali
Published 2009

Modified failure mode and effect analysis to mitigate sustainable related risk in the palm oil supply chain

by Anugerah, Adhe Rizky, Ahmad, Siti Azfanizam, Samin, Razali, Samdin, Zaiton, Kamaruddin, Norfaryanti
Published 2021

Temperature distribution of micro milling process due to uncut chip thickness

by Baharudin, B.T Hang Tuah, Ng, Kooi Pin, Sulaiman, Shamsuddin, Samin, Razali, Ismail, Mohd Shahrom
Published 2014

Research of chatter suppression in turning operation with process damping using stability lobe diagram

by Samin, Razali, Nuawi, Mohd Zaki, Azmi, Farhan Akmal, Mohamed Haris, Sallehuddin, A. Ghani, Jaharah
Published 2019

The use of Taguchi method in the design of plastic injection mould for reducing warpage

by Tang, Sai Hong, Tan, Y. J., Salit, Mohd Sapuan, Sulaiman, Shamsuddin, Ismail, Napsiah, Samin, Razali
Published 2007

A hybrid genetic-heuristic algorithm for scheduling of automated guided vehicles and quay cranes in automated container terminals

by Homayouni, Seyed Mahdi, Tang, Sai Hong, Ismail, Napsiah, Mohd Ariffin, Mohd Khairol Anuar, Samin, Razali
Published 2009

Effect of disc brake squeal with respect to thickness variation: Experimental Modal Analysis

by Samin, Razali, Hao, N. C., As'arry, Azizan, Md Rezali, Khairil Anas, Nuawi, Mohd Zaki
Published 2018

Development and tuning of bacteria foraging optimization algorithm on cell formation in cellular manufacturing system

by Nouri, Hossein, Tang, Sai Hong, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B. T. Hang Tuah, Samin, Razali
Published 2013

Metaheuristic techniques on cell formation in cellular manufacturing system

by Nouri, Hossein, Tang, Sai Hong, Baharudin, B. T. Hang Tuah, Mohd Ariffin, Mohd Khairol Anuar, Samin, Razali
Published 2013

Predicting the transmissibility of a glove material to the palm using a simple lumped parameter model of the hand and the glove

by Md Rezali, Khairil Anas, As'arry, Azizan, Zulkefli, Zamir Aimaduddin, Samin, Razali, Abdul Jalil, Nawal Aswan
Published 2016