Micro-Milling of Thin Mould for Continuous Productions of Polymer Microfluidic Devices

by Saptaji, Kushendarsyah
Published 2016

Orthogonal cutting study of the micro-cutting thin workpiece

by Saptaji, Kushendarsyah, Subbiah, Sathyan
Published 2014

Finite Element Study on The Effect of Substrate Properties in Micro-cutting Thin Workpiece Materials

by Saptaji, Kushendarsyah, Subbiah, Sathyan
Published 2016

Burr Reduction of Micro-milled Microfluidic Channels Mould Using a Tapered Tool

by Saptaji, Kushendarsyah, Subbiah, Sathyan
Published 2017

Effect of side edge angle and effective rake angle on top burrs in micro-milling

by Saptaji, Kushendarsyah, Subbiah, Sathyan, Dhupia, Jaspreet Singh
Published 2013

Machining of biocompatible materials: a review

by Saptaji, Kushendarsyah, Mebrahitom, A., Azmir, Azhari
Published 2018

Sustainable Bauxite Mining Guidelines

by Prosser, M., Johnson, M., Saptaji, Kushendarsyah
Published 2017

Surface Roughness Analysis on Sheet Metals During AWJ Machining Using Low Pressure

by Nazrin, Mokhtar, Asmelash, Mebrahitom, Saptaji, Kushendarsyah, Azmir, Azhari
Published 2023

A review on peening processes and its effect on surfaces

by Tariq, Syed Qutoba, Asmelash, Mebrahitom, Saptaji, Kushendarsyah, Azmir, Azhari
Published 2022

Study on end brush deburring and sintered diamond ball deburring of micro-features milled

by Sai, T. K., Saptaji, Kushendarsyah, Gebremariam, M.A., Fatchurrohman, Nanang
Published 2019

Implementation of convolutional neural network (CNN) algorithm for autonomous robot / Tiara Kusuma Dewi ... [et al.]

by Dewi, Tiara Kusuma, Saptaji, Kushendarsyah, Simarmata, Adven, Fikri, Muhamad Rausyan
Published 2024

Deburring method of aluminum mould produced by milling process for microfluidic device fabrication

by Saptaji, Kushendarsyah, Triawan, Farid, Sai, Tong Keong, Gebremariam, M. A.
Published 2021

Fabrication of micro dimples pattern using ball end mill

by Muhamad Izdhar, Zaki, Saptaji, Kushendarsyah, Ramdan, R. D., Kurniawan, Tedi
Published 2019

Mechanical Performance Evaluation of Al2O3–ZrO2–Ti Composite Materials

by Nur Aziera, Nur Aziera, Mebrahitom, A., Azmir, Azhari, Saptaji, Kushendarsyah
Published 2023

Investigation on the effect of build orientation and heat treatment on tensile strength and fracture mechanism of FDM 3D printed PLA

by Fatchurrohman, Nanang, Nurul Najihah Najlaa, Noor Hamdan, Gebremariam, Mebrahitom Asmelash, Saptaji, Kushendarsyah
Published 2020

Experimental investigation on the effect of masked multiple passes abrasive waterjet machining surface texturing on coefficient of friction

by Husin, Hafiz, Mat Nawi, Mohd Nazir, Gebremariam, M A, Saptaji, Kushendarsyah, Azhari, Azmir
Published 2024

Investigation on optimum waterjet cleaning parameters for minimum surface impact during paint removal from mild steel

by Mohd Nazir, Mat Nawi, Hafiz, Husin, Gebremariam, Mebrahitom Asmelash, Saptaji, Kushendarsyah, Azmir, Azhari
Published 2024

Suppression of chatter in high speed milling using microcontroller based speed controller by spindle speed variation method

by Yusoff, A. R., Gebremariam, Mebrahitom Asmelash, Saptaji, Kushendarsyah, Che Ghani, S. A., Osman Zahid, Muhammed Nafis
Published 2019

Exploring the chemical properties and microstructural characterisations of hybrid asphalt binders for enhanced performance

by Wan Noor Hin, Mior Sani, Putra Jaya, Ramadhansyah, Khairil Azman, Masri, Saptaji, Kushendarsyah, Dulaimi, Anmar
Published 2024

Analysis and prediction of the cutting forces of three dimensional end milling using finite elements modelling

by Gebremariam, Mebrahitom Asmelash, Saptaji, Kushendarsyah, Mohd Azmir, Mohd Azhari, Zamzuri, Hamedon, Ahmad Razlan, Yusoff, Muhammed Nafis, Osman Zahid
Published 2020