Experimental investigation on full-scale sub-assemblace frame

by Shek, Poi Ngian
Published 2011

Structural behaviour of built - up steel sections using partial strength connection

by Shek, Poi Ngian
Published 2009

Performance of cruciform column using universal beam sections under axial compression load

by Md. Tahir, Mahmood, Shek, Poi Ngian
Published 2005

Limiting the sway on multi-storey un-braced steel frames bending on weak axis with partial strength connections

by Md. Tahir, Mahmood, Shek, Poi Ngian
Published 2011

Capacity of interlocking stub column with cement mortar infill under axial compression load

by Shek, Poi Ngian, Lee, Yeong Huei
Published 2015

Typical tests on cold-formed steel structures

by Md. Tahir, Mahmood, Tan, Cher Siang, Shek, Poi Ngian
Published 2006

Push-off tests on pin-connected shear studs with composite steel-concrete beams

by Md. Tahir, Mahmood, Shek, Poi Ngian, Tan, Cher Siang
Published 2009

Engineering properties of bio-inspired cement mortar containing seashell powder

by Woon, Chin Peow, Shek, Poi Ngian, Md. Tahir, Mahmood
Published 2014

Can cold-formed steel section be use as a sustainable structural member in building and civil engineering constructions? A mini review

by Lawan, M. M., Shek, Poi Ngian, M. Tahir, M.
Published 2020

Flexural performance of cold-formed steel section in a composite beam system

by Lawan, M. M., Shek, Poi Ngian, M. Tahir, M.
Published 2020

Wind-moment design of semi-rigid un-braced steel frames using cruciform column (CCUB) section

by Shek, Poi Ngian, Md. Tahir, Mahmood, Sulaiman, Arizu, Tan, Cher Siang
Published 2015

Experimental evaluation of flush end-plate connection with built-up hybrid beam section

by Shek, Poi Ngian, Md. Tahir, Mahmood, Sulaiman, Arizu, Tan, Cher Siang
Published 2012

Experimental investigation on wide-span cold-formed steel roof truss system

by Mohammad, Shahrin, Md. Tahir, Mahmood, Tan, Cher Siang, Shek, Poi Ngian
Published 2012

Economic aspects of partial strength connection in the design of braced steel frame using trapezoidal web profiled steel sections

by Md. Tahir, Mahmood, Sulaiman, Arizu, Tan, Cher Siang, Shek, Poi Ngian
Published 2007

Three-dimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam-column with partially welded flush end-plate connection

by Omer, Joma H. M., Kueh, Ahmad Beng Hong, Shek, Poi Ngian
Published 2018

Experimental investigation of end-plate connection with cruciform column section

by Shek, Poi Ngian, Md. Tahir, Mahmood, Tan, Cher Siang, Kueh Ben, Ahmad
Published 2011

Experimental investigation of end-plate connection with cruciform column section

by Kueh, A. B. H., Tan, C. S., Tahir, M. M., Shek, Poi Ngian
Published 2011

Analytical study of end-plate connection on cruciform column section

by Tan, Boon Cheik, Shek, Poi Ngian, Md. Tahir, Mahmood, Mu, Ker Shin
Published 2015

Maximum local thermal effects carpet plot for symmetric laminated composite plates

by Kueh, Ahmad Beng Hong, Shek, Poi Ngian, Tan, Cher Siang, Md. Tahir, Mahmood
Published 2011

Structural behavior of combined flange-cleat and gusset plate connection for cold -formed steel double channel sections

by Kueh, Ahmad, Tan, Cher Siang, Md Tahir, Mahmood, Shek, Poi Ngian, Mohammad, Shahrin
Published 2011