Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.]

by Tharazi, Izdihar, Sulong, Abu Bakar, Mohd Salleh, Farrahshaida
Published 2020

Process optimization of melt spinning and mechanical strength enhancement of functionalized multi-walled carbon nanotubes reinforcing polyethylene fibers

by Sulong, Abu Bakar, Park, Joohyuk, Azhari, Che Husna, Jusoff, Kamaruzaman
Published 2011

Influence of Sulfuric Acid on the Tensile Properties of Halloysite Reinforced Polyurethane Composite / Tayser Sumer Gaaz...[et al.]

by Tayser, Sumer Gaaz, Sulong, Abu Bakar, H. Kadhum, Abdul Amir
Published 2017

Optimization of Hot Pressing Process for Unidirectional Kenaf Polypropylene Composites by Full Factorial Design / Dulina Tholibon...[et al.]

by Tholibon, Dulina, Sulong, Abu Bakar, Muhamad, Norhamidi, Ismail, Nur Farhani
Published 2017

The Characterization and Rheological Investigation of Materials for Powder Injection Moulding / Ukwueze Bonaventure Emeka...[et al.]

by Ukwueze, Bonaventure Emeka, Sulong, Abu Bakar, Muhamad, Norhamidi, Sajuri, Zainuddin
Published 2017

Determination of Critical Powder Loading of Titanium-Hydroxyapatite with Powder Space Holder for Powder Injection Molding Feedstocks / Mohd Yusuf Zakaria...[et al.]

by Zakaria, Mohd Yusuf, Sulong, Abu Bakar, Ramli, Mohd Ikram, Raza, Muhammad Rafi
Published 2017

Rheological properties of titanium niobium based feedstocks for metal injection moulding / Rozie Nani Ahmad...[et al.]

by Ahmad, Rozie Nani, Muhamad, Norhamidi, Sulong, Abu Bakar, Wahi, Azizah, Mohd Salleh, Farrahshaida
Published 2017

Rheological Properties Of Titanium Alloy (Ti6Al4V) – Wollastonite (W) Composite Using Palm Stearin as Based Binder / Mohd Ikram Ramli...[et al.]

by Ramli, Mohd Ikram, Sulong, Abu Bakar, Muhamad, Norhamidi, Muchtar, Andanastuti, Zakaria, Mohd Yusuf
Published 2017

Development of lanthanum strontium cobalt ferrite composite cathodes for intermediate- to low-temperature solid oxide fuel cells

by Baharuddin, Nurul Akidah, Abd Rahman, Hamimah, Muchtar, Andanastuti, Sulong, Abu Bakar, Abdullah, Huda
Published 2013

Effects of deposition time and counter-electrode size on the fabrication of lscf-sdc carbonate composite cathode for sofc

by Baharuddin, Nurul Akidah, Abd. Rahman, Hamimah, Muchtar, Andanastuti, Sulong, Abu Bakar, Abdullah, Huda
Published 2018

Preparation of SS316L MIM feedstock with biopolymer as a binder

by Abdullah, Abu, Hassan, Norita, Hassan, Noor Azlina, Sulong, Abu Bakar, Mas'Ood, Najlaa Nazihah
Published 2018

Electrochemical Behaviour and Interfacial Contact Resistance of Ti-6Al-4V and SUS 316L plates with Potential Application as a Bipolar Plate in PEMFC / Nur Fawwaz Asri ...[et al.]

by Asri, Nur Fawwaz, Husaini, T., Majlan, Edy Herianto, Sulong, Abu Bakar, Wan Daud, Wan Ramli
Published 2017

Influence Of Short Heat Treatment On The Microstructures And Mechanical Properties Of Thixoformed Aluminum Alloy Composite

by Salleh, Mohd Shukor, Hashim, Hanizam, Abd Rahman, Ammar, Sulong, Abu Bakar, Abd Rahman, Ammar
Published 2021

The development of metal injection moulding for ZK60 magnesium alloy using palm stearin based binder system

by Harun, M. R., Muhamad, Norhamidi, Sulong, Abu Bakar, Nor, Nor H. M., Jamaludin, Khairur R.
Published 2011

Metal injection moulding of ZK60 magnesium alloy powder using palm stearin based binder system

by Harun, Mohd. Ruzi, Muhamad, N., Sulong, Abu Bakar, Mohamad Nor, N. H., Jamaludin, K. R.
Published 2012

The study of sintering behavior of stainless steel 17-4PH-stainless steel 316L for two materials powders injection molding (2C-PIM) process / Najlaa Nazihah Mas’ood...[et al.]

by Mas’ood, Najlaa Nazihah, Sulong, Abu Bakar, Muhamad, Norhamidi, Mohd Foudzi, Farhana, Mohd Salleh, Farrahshaida
Published 2019

Effect UV/O3 Modified Rice Husk on the Mechanical Properties of Recycle HDPE Rice Husk Composite / Nishata Royan Rajendran Royan ...[et al.]

by Rajendran Royan, Nishata Royan, Sulong, Abu Bakar, Mohd, Nor Yuliana Yuhana, Abdul Ghani, Mohd Hafizuddin, Ahmad, Sahrim
Published 2017

Effect of Multi-walled Carbon Nanotube on Mechanical Properties of Kenaf/Polypropylene Composites / Zakaria Razak...[et al.]

by Razak, Zakaria, Sulong, Abu Bakar, Muhamad, Norhamidi, Md Radzi, Mohd. Khairol Fadzly, Tholibon, Dulina, Tharazi, Izdihar, Ismail, Nur Farhani
Published 2017

Necking mechanism under various sintering process parameters-A review

by Mazlan, Mohd Rhafiq, Jamadon, Nashrah Hani, Rajabi, Armin, Sulong, Abu Bakar, Mohamed, Intan Fadhlina, Yusof, Farazila, Jamal, Nur Ayuni
Published 2023

Necking mechanism under various sintering process parameters – a review

by Mazlan, Mohd Rafiq, Jamadon, Nashrah Hani, Armin, Rajabi, Sulong, Abu Bakar, Mohamed, Intan Fadhlina, Yusof, Farazila, Jamal, Nur Ayuni
Published 2023