Development of phase doppler anemometer for measuring velocity and size distribution of paticulate materials

by Wiwut Tanthapanichakoon
Published 2010

Modeling and simulation of flows in two-phase fluidized systems

by Sunun Limtrakul, Wiwut Tanthapanichakoon
Published 2008

Discrete particle simulation of spouted bed with heat transfer

by Thanit Swasdisevi, Wiwut Tanthapanichakoon
Published 2013

Optimization of the debutanizer in platforming unit using PRO/II

by Wiwut Tanthapanichakoon, Anchaleeporn Waritswat Lothongkum
Published 2010

Syngas production with low tar content from cellulose pyrolysis in molten salt combined with Ni/Al<inf>2</inf>O<inf>3</inf> catalyst

by Sakhon Ratchahat, Atthapon Srifa, Wanida Koo-amornpattana, Chularat Sakdaronnarong, Tawatchai Charinpanitkul, Kevin C.W. Wu, Pau Loke Show, Satoshi Kodama, Wiwut Tanthapanichakoon, Hidetoshi Sekiguchi
Published 2022

Stochastic model development and simulation of agglomerative deposition of aerosol on an electret fiber

by Weeraya Sae-lim
Published 2008

Simulation of removal of humidity in a factory using various rotary honeycomb dehumidifiers

by Ornjira Rungarunsangchai
Published 2009

Factors affecting the smoothness of flow rate of a screw feeder and a rotary table feeder

by Daranee Srina
Published 2008

Stochastic simulation of convective diffusional deposition of polydisperse aerosols on a dust loaded fiber

by Montree Wongsri
Published 2014

Simultaneous treatment of gaseous volatile organic compounds and aqueous phenol using a corona discharge reactor

by Kajornsak Faungnawakij
Published 2006

Removal of dilute mixture of styrene and ammonia using corona discharge reactor at various temperatures

by Sahat Chaiyo
Published 2009

Drying characteristics of some agricultural produce in Thailand

by Thucsina Loychirakul
Published 2013

Synthesis of methanol with an industrial catalyst and development of computer model for an industrial methanol reactor

by Sunun Limtrakul
Published 2014

Adsorption kinetics of aqueous binary mixtures containing phenol, RED31 and/ or black5 on activated carbon prepared from waste tires

by Pannada Japthong
Published 2006

Simulation of industrial pneumatic conveying dryer with constant and falling rates of drying

by Sedtha Tantirodchanamate
Published 2009

Effect of reactor structure on removal efficiency of gaseous pollutants using electron attachment mechanism

by Kittisak Larpsuriyakul
Published 2010

Stochastic simulation of agglomerative deposition of aerosol on an electret fiber

by Kreangkrai Maneeintr
Published 2008

Development of quantitative indices for evaluating the degree of dispersion of additives in compounded materials using computer experiments

by Mathee Suphawita
Published 2008

Development and construction of tester and testing of Lower Explosion Limit of particulate materials

by Songchai Wiriyaumpaiwong
Published 2013

Factors influencing the dispersion of pigments in polystyrene upon using a continuous twin-screw kneader

by Naorat Phingchin
Published 2013