Effect of modifier elements on machinability of Al-20Mg2Si metal matrix composite during dry turning

by Yusof, N. M., Razavykia, A., Farahany, S., Esmaeilzadeh, A.
Published 2016

Optimization and development of Maghemite (γ-Fe2O3) filled poly-L-lactic acid (PLLA)/thermoplastic polyurethane (TPU) electrospun nanofibers using Taguchi orthogonal array for tiss...

by Fallahiarezoudar, E., Ahmadipourroudposht, M., Idris, A., Yusof, N. M.
Published 2017

A review of minimum quantity lubrication technique with nanofluids application in metal cutting operations

by Sharif, S., Sadiq, I. O., Yusof, N. M., Mohruni, A. S.
Published 2017

Development of cost estimation model of the membrane system

by Jiran, N. S., Saman, M. Z. M., Yusof, N. M.
Published 2019

Identifying sustainable warehouse management system indicators and proposing new weighting method

by Torabizadeh, M., Yusof, N. M., Ma'aram, A., Shaharoun, A. M.
Published 2020

Job shop scheduling using shifting bottleneck heuristic algorithm

by Tamtomo, B. T., Kurniawati, D. A., Yusof, N. M., Wong, K. Y.
Published 2021

Effects of cutting condition on surface roughness when turning untreated and sb-treated al-11%si alloys using pvd coated tools

by Barzani, M. M., Yusof, N. M., Farid, A. A., Farahany, S., Davoudinejad, A.
Published 2013

Cost assessment on the application of hollow fibre membrane module in wastewater treatment system in small scale textile industry.

by Jiran, N. S., Zainol, Z. N., Saman, M. Z. M., Yusof, N. M.
Published 2019

Cost assessment on the application of hollow fibre membrane module in wastewater treatment system in small scale textile industry

by Jiran, N. S., Zainol, Z. N., Saman, M. Z. M., Yusof, N. M.
Published 2019

As-synthesized oleic amido propyl betaine surfactant mixture and the effect on the crude oil-seawater interfacial tension

by Wazir, N.A., Ramli, A., Yusof, N.M., Saphanuchart, W., Majanun, E.S.
Published 2020

Characterization of maghemite (γ-Fe2O3)-loaded poly-l-lactic acid/thermoplastic polyurethane electrospun mats for soft tissue engineering

by Fallahiarezoudar, E., Ahmadipourroudposht, M., Idris, A., Yusof, N. M., Marvibaigi, M., Irfan, M.
Published 2016

3D biofabrication of thermoplastic polyurethane (TPU)/poly-L-lactic acid (PLLA) electrospun nanofibers containing maghemite (γ-Fe2O3) for tissue engineering aortic heart valve

by Fallahiarezoudar, E., Ahmadipourroudposht, M., Yusof, N. M., Idris, A., Ngadiman, N. H. A.
Published 2017

Development of highly porous biodegradable γ-Fe2O3/polyvinyl alcohol nanofiber mats using electrospinning process for biomedical application

by Ngadiman, N. H. A., Yusof, N. M., Idris, A., Misran, E., Kurniawan, D.
Published 2017

Novel processing technique to produce three dimensional polyvinyl alcohol/maghemite nanofiber scaffold suitable for hard tissues

by Ngadiman, N. H. A., Yusof, N. M., Idris, A., Fallahiarezoudar, E., Kurniawan, D.
Published 2018

A Study on the Wind and Geothermal as a Potential of Renewable Energy Sources in Malaysia

by Basar, Mohd Farriz, Mohamad Sapiee, Mohd Razali, Hishamudin, Zakaria, Yusof, N.M, Wahid, N.
Published 2010

Microstructural characterisation of air plasma sprayed nanostructure ceramic coatings on Mg–1%Ca alloys (bonded by NiCoCrAlYTa alloy)

by Daroonparvar, M., Yajid, M. A. M., Yusof, N. M., Bakhsheshi-Rad, H. R., Hamzah, E.
Published 2016

Identification of electro-hydraulic actuator using fractional model

by Yusof, N. M., Ishak, N., Adnan, R., Sam, Y. M., Tajjudin, M., Rahiman, M. H. F.
Published 2016

The performance of γ-Fe2O3 and xGnP nanofluid in hard turning of AISI 420 stainless steel

by Adrees Majeed, F. S., Yusof, N. M., Sharif, S., Suhaimi, M. A., Saad, S. M., Zakaria, K., Shayfull, Z., Aziz, S. N. A.
Published 2021

Conceptual design of cantilever support for long haul bus passenger seat

by Tan, CheeFai, Tean, Z.Y., Said, M.R., Khalil, S.N., Sudin, M.N., Karjanto, Juffrizal, Yusof, N.M., Sivarao, Subramonian
Published 2013

Resilient Dams for Malaysia: A Risk-Informed Decision-Making-Based Approach

by Sidek L.M., Ahmad S.A., Yunus A.M., Saman D.H., Basri H., Yusof N.M., Torres A.M., Rohaizi M.S., Azizi A.S.M.
Published 2024