#TITLE_ALTERNATIVE#

• Main Author: FEBRIAN (NIM 12206011); Pembimbing: Ir. Tutuka Ariadji, M.Sc., Ph.D., FARID
• Format: Final Project
• Language: Indonesia
• Online Access: https://digilib.itb.ac.id/gdl/view/14169
• Institution: Institut Teknologi Bandung

To lift of the fluid can not flow naturally, artificial lift mechanism must be designed properly. In addition to good design, control and review the performance of SRP is required to ensure production in the field. After producing for some time, parameters that affect the design of the SRP was supposed to be compared with production activities in the field. So that can be known whether the wells already in production with optimum flow rate or not. For this purpose, developed a study that aims tp develop guidelines for optimization of SRP.<p>Sucker Rod Pump (SRP) optimization guide was built by the data plot between the flow rate with power needs. Plot the data is divided into classes where each class describes the results of the optimization is performed. The relationship between flow rate and power demand is expected to be a justification for determining the status of the SRP design optimization.<p>Optimization is done to produce a total flow rate increase of 10.81 %, but increase the flow rate was also followed with increasing power demand of 26.82 %. If the observed per field, field X2 is a field that gives the best optimization results. Field X2 flow rate increased after optimization of 19.74 % and the largest increase among the other field is also strengthened with the increase of power which can be ignored.