#TITLE_ALTERNATIVE#

• Main Author: (NIM: 123 03 026), SUHADA
• Format: Final Project
• Language: Indonesia
• Online Access: https://digilib.itb.ac.id/gdl/view/20550
• Institution: Institut Teknologi Bandung

Impedance-P and VpVs ratio are parameters that can distinguish lithology cleanly, but those parameters have different senstivity in fluid determination. Impedance-P has a poorly in determination while VpVs ratio can determine fluid very well. Because of that, intgreated from these two parameters are acquired to give important information in reservoir characterization. <br /> <br /> <br /> <br /> <br /> <br /> <br /> This final project is purposing to give an information about spreads of lithology, fluid and reservoir quality. Inversion seismic is conducted to this final project which the yield is correlated with well data and integrated with VpVs ratio section. After that, the result of inversion process will be enhanced with Multi- Attribute analysis. Multi-Attribute analysis is conducting too with other parameter, such as gamma ray and porosity that will be used for interpretation. Before intepretation, log frequency low analyis is performing to avoid dissonance parameter caused by highly log frequency. From interpretation, we can obtain an information about spreads of lithology reservoir consist of shaly sand, sand, shale and carbonate. Gas fluid is integrated to area with lower VpVs ratio and Impedance-P. Reservoir at high contour has low quality than high porosity value. The yield of multi-attribute seismic method is easier to intepret and has high value of correlation log. <br />