PENGARUN PENGGUNAAN AGGREGAT BERGRADASI TIDAK KONTINU TERHADAP MUTU BETON
Generally concrete is made with a continuous and uniform aggregate gradation which will produce a workable mix. This thesis presents an experiment on concrete mixes using gap-graded aggregates for two concrete qualities, namely K-175 and K-300. The specimens are cylinders of 150 mm x 300 mm cured in...
Saved in:
| Main Author: | |
|---|---|
| Format: | Theses |
| Language: | Indonesia |
| Subjects: | |
| Online Access: | https://digilib.itb.ac.id/gdl/view/2818 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Institut Teknologi Bandung |
| Language: | Indonesia |
| Summary: | Generally concrete is made with a continuous and uniform aggregate gradation which will produce a workable mix. This thesis presents an experiment on concrete mixes using gap-graded aggregates for two concrete qualities, namely K-175 and K-300. The specimens are cylinders of 150 mm x 300 mm cured in water tank until the testing date. The specimens' compressive strength and modulus of elasticity were tested. The resultr of the test are compared to the results of .p-esit.-t previous researche4on this subject. These result: show that the effect of gap-graded aggre tomes on the mechanical properties of concrete depend amonge ratio of coarse aggregate to total aggregate content and the ratio of fine sand to total sand Cfine aggregate) content. It is also shownthat the mechanical properties of low strength concrete are more affected by the choice of aggregate gradation than those of higher strength concretes |
|---|