STUDI KARAKTERISTIK REDAMAN PELAT PLEXIGLAS PERSEGI PANJANG DENGAN GETARAN HARMONIK
<b>Abstract</b><p align=\"justify\">Experiment on the rectangular plate plexiglas of 400x40x5 mm using clamp and supporting system for obtaining a damping ratio ? and a loss factor ? was made. The system was vibrated by the excitation frequency from 20 to 180 Hz and measu...
Saved in:
Main Author: | |
---|---|
Format: | Theses |
Language: | Indonesia |
Online Access: | https://digilib.itb.ac.id/gdl/view/5368 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Institut Teknologi Bandung |
Language: | Indonesia |
id |
id-itb.:5368 |
---|---|
spelling |
id-itb.:53682006-06-17T09:32:31ZSTUDI KARAKTERISTIK REDAMAN PELAT PLEXIGLAS PERSEGI PANJANG DENGAN GETARAN HARMONIK Sjahmanto (NIM :233, Mohammad Indonesia Theses INSTITUT TEKNOLOGI BANDUNG https://digilib.itb.ac.id/gdl/view/5368 <b>Abstract</b><p align=\"justify\">Experiment on the rectangular plate plexiglas of 400x40x5 mm using clamp and supporting system for obtaining a damping ratio ? and a loss factor ? was made. The system was vibrated by the excitation frequency from 20 to 180 Hz and measured from 3 different position with the different time. <br /> <p align=\"justify\">Measuring and data acquisition was applied recording method with computer program and manual method or direct reading from the Digital Multimeter. The method of calculation or analysis was used a logarithmic decrement, half power bandwidth and dynamic- magnification factor. <br /> <p align=\"justify\">Analysis result showed that with logarithmic decrement method, the damping ratio was decreasing from 10-13% to 4-6% and the maximum value appeared at a resonance. Calculated loss factor was obtained between 0.1 and 0.5 following the increasing frequency of excitation. When observation was made on the measuring point, it was obtained that the vrl^,- of damping ratio for measuring point closed to the clamp was higher than the value of that for other measuring points. <br /> <p align=\"justify\">With the based on half power bandwidth method and dynamic-magnification factor for the observation at a resonance range, the value of damping ratio was obtained about 25-40%, while analysis of loss factor was obtained about 0.5 up to 0.8. <br /> <p align=\"justify\">For observation with based on the measuring point, the value of damping ratio at the middle position was obtained higher then that was obtained at other positions. text |
institution |
Institut Teknologi Bandung |
building |
Institut Teknologi Bandung Library |
continent |
Asia |
country |
Indonesia Indonesia |
content_provider |
Institut Teknologi Bandung |
collection |
Digital ITB |
language |
Indonesia |
description |
<b>Abstract</b><p align=\"justify\">Experiment on the rectangular plate plexiglas of 400x40x5 mm using clamp and supporting system for obtaining a damping ratio ? and a loss factor ? was made. The system was vibrated by the excitation frequency from 20 to 180 Hz and measured from 3 different position with the different time. <br />
<p align=\"justify\">Measuring and data acquisition was applied recording method with computer program and manual method or direct reading from the Digital Multimeter. The method of calculation or analysis was used a logarithmic decrement, half power bandwidth and dynamic- magnification factor. <br />
<p align=\"justify\">Analysis result showed that with logarithmic decrement method, the damping ratio was decreasing from 10-13% to 4-6% and the maximum value appeared at a resonance. Calculated loss factor was obtained between 0.1 and 0.5 following the increasing frequency of excitation. When observation was made on the measuring point, it was obtained that the vrl^,- of damping ratio for measuring point closed to the clamp was higher than the value of that for other measuring points. <br />
<p align=\"justify\">With the based on half power bandwidth method and dynamic-magnification factor for the observation at a resonance range, the value of damping ratio was obtained about 25-40%, while analysis of loss factor was obtained about 0.5 up to 0.8. <br />
<p align=\"justify\">For observation with based on the measuring point, the value of damping ratio at the middle position was obtained higher then that was obtained at other positions. |
format |
Theses |
author |
Sjahmanto (NIM :233, Mohammad |
spellingShingle |
Sjahmanto (NIM :233, Mohammad STUDI KARAKTERISTIK REDAMAN PELAT PLEXIGLAS PERSEGI PANJANG DENGAN GETARAN HARMONIK |
author_facet |
Sjahmanto (NIM :233, Mohammad |
author_sort |
Sjahmanto (NIM :233, Mohammad |
title |
STUDI KARAKTERISTIK REDAMAN PELAT PLEXIGLAS PERSEGI PANJANG DENGAN GETARAN HARMONIK |
title_short |
STUDI KARAKTERISTIK REDAMAN PELAT PLEXIGLAS PERSEGI PANJANG DENGAN GETARAN HARMONIK |
title_full |
STUDI KARAKTERISTIK REDAMAN PELAT PLEXIGLAS PERSEGI PANJANG DENGAN GETARAN HARMONIK |
title_fullStr |
STUDI KARAKTERISTIK REDAMAN PELAT PLEXIGLAS PERSEGI PANJANG DENGAN GETARAN HARMONIK |
title_full_unstemmed |
STUDI KARAKTERISTIK REDAMAN PELAT PLEXIGLAS PERSEGI PANJANG DENGAN GETARAN HARMONIK |
title_sort |
studi karakteristik redaman pelat plexiglas persegi panjang dengan getaran harmonik |
url |
https://digilib.itb.ac.id/gdl/view/5368 |
_version_ |
1820663665930534912 |