STUDY OF THE INFLUENCE OF TEMPERATURE ON THE INDIRECT TENSILE STRENGTH OF LIMESTONE AT TEMPERATURES OF 25 ?C TO 400 ?C
One of the problems found in the Underground Coal Gasification process is coal interburden or overburden which is influenced by the increase in temperature in the UCG process. The result of increasing temperature is the formation of cracks in the rock which can affect the stability of the UCG hol...
Saved in:
| Main Author: | |
|---|---|
| Format: | Theses |
| Language: | Indonesia |
| Online Access: | https://digilib.itb.ac.id/gdl/view/80439 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Institut Teknologi Bandung |
| Language: | Indonesia |
| Summary: | One of the problems found in the Underground Coal Gasification process is coal interburden
or overburden which is influenced by the increase in temperature in the UCG process. The
result of increasing temperature is the formation of cracks in the rock which can affect the
stability of the UCG hole, increasing the effects of ground surface subsidence, and the risk of
pollutants moving from the UCG process through the cracks into the aquifer. In this research,
the effect of heat on the interburden rock or overburden of limestone at temperatures of 25 ? C
to 400 ? C has been studied, especially on tensile strength properties which are correlated with
physical parameters, ultrasonic speed, cohesion, internal shear angle, and corner toughness
properties. and broken (KIc). Compared to testing at room temperature (25 ? C) with testing at
400 ? C, the results showed a decrease in density of 1.26%, porosity increased by 174.29%, void
ratio increased by 87.35%, and vp decreased by 17 .59%. In terms of tensile strength, the
tensile strength value tends to decrease by 54.23% and the KIc value obtained from the indirect
tensile strength test decreases by 54.22%. The tensile strength value of rock (?t) and the KIc
value have a directly proportional correlation. This shows that the greater the tensile strength
of the rock, the more difficult it is for the material to form fracture propagation. Numerical
modeling can model the Brazilian test, with failure criteria using ?t = ?3, numerical modeling
can model with a difference of <10%. According to the tensile strength failure criterion, crack
propagation in the test sample in numerical modeling can already occur at a value of F = 87-
90%. Modeling is reviewed using the Mohr-Coulumb criteria. It was found that the percent of
area experiencing failure increased with increasing temperature by around 22-30%. |
|---|