ANALISIS PARAMETER KOEFISIEN TAHANAN GULIR ALAT ANGKUT PADA JALAN ANGKUT TAMBANG DENGAN MATERIAL LEMPUNG PASIRAN DENGAN SIMULASI LABORATORIUM DAN PENGUKURAN DI LAPANGAN
Production rate in mine process is affected by work performance of haul trucks and excavators. Haul trucks interaction with ground will cause forces needed to drive the vehicle. The definition of rolling resistance is external forces that resist the vehicle to move. Coefficient of Rolling Resista...
Saved in:
| Main Author: | |
|---|---|
| Format: | Final Project |
| Language: | Indonesia |
| Online Access: | https://digilib.itb.ac.id/gdl/view/81795 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Institut Teknologi Bandung |
| Language: | Indonesia |
| Summary: | Production rate in mine process is affected by work performance of haul trucks and
excavators. Haul trucks interaction with ground will cause forces needed to drive the
vehicle. The definition of rolling resistance is external forces that resist the vehicle to
move. Coefficient of Rolling Resistance (CRR) is total rolling resistance divided by
normal weight of the vehicle.
This research’s purpose is to point the rolling resistance and Coefficient of Rolling
Resistance on silty sandstone, and analyze its effect to it. CRR number is measured by a
simulation of a single lori that pulled by wire rope that operated by a winch machine
with 13 m track whereas the field data acquisition will be adjusted to the laboratory.
Variables that measured in this research are total vehicle weight (loaded), tire pressure,
pulling velocity, and tire deflection in a static condition.
It is shown that the increase of payload weight, pulling velocity, and grade of the track
can increase the number of CRR. But the increase of tire pressure will reduce the
number of CRR. Dimensional analysis is conducted to determine the empirical relation
between the number of CRR and those variables. |
|---|