REMOVAL OF ORGANIC COMPOUNDS FROM WASTEWATER USING MONTMORILLONIT AND ACTIVATED CARBON NANOMCOMPOSITE
Water pollution continues to escalate with the growth of industrial activities carried out by humans. One of the mitigation efforts to reduce water pollution is wastewater treatment. Adsorption is a commonly used method in wastewater treatment. Restiawaty et al. (2021) have previously performed a...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Final Project |
| 語言: | Indonesia |
| 在線閱讀: | https://digilib.itb.ac.id/gdl/view/84462 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 機構: | Institut Teknologi Bandung |
| 語言: | Indonesia |
| 總結: | Water pollution continues to escalate with the growth of industrial activities carried out
by humans. One of the mitigation efforts to reduce water pollution is wastewater
treatment. Adsorption is a commonly used method in wastewater treatment. Restiawaty
et al. (2021) have previously performed adsorption using montmorillonit-activated
carbon-alginat nanocomposites to separate GE and MCPD contaminants from RBDPO.
This study aims to test an adsorbent made from the same raw materials to remove organic
compounds such as methylene blue and rhodamine B from wastewater. This research is
conducted to determine the optimal composition of montmorillonit, activated carbon, and
alginat for achieving the best adsorption efficiency, as well as to characterize the
adsorbent. The study also investigates the impact of various variables on the adsorption
performance of the adsorbent using both batch and continuous reactors. Batch
experiments revealed that an adsorbent with a MMT:AC ratio of 1:1:1 exhibited the
highest efficiency with an adsorption duration of 120 minutes. Adsorption of a Methylene
Blue solution at 248 mg/L resulted in a removal percentage of up to 82%, while
adsorption of a Rhodamine B solution at 213 mg/L achieved a removal percentage of up
to 58%. The adsorbent, consisting mainly of carbon, oxygen, and calcium, has an average
pore size of 2.997 and a compressive strength of 4.31 N/mm². Continuous method
experiments showed that flow rate significantly affects the removal percentage, with the
lowest flow rate (22 mL/second) providing the best adsorption performance. Optimal
adsorption conditions were achieved at the highest column height (1.5 cm) with the
longest breakthrough time (4.94 minutes) and saturation time (230 minutes). The MMTNA-Alginat nanocomposite exhibits breakthrough and saturation times similar to those
of comparable adsorbents, but the qmax remains lower
|
|---|