KETELITIAN DTM DARI DATA LIDAR BERDASARKAN PERBEDAAN TINGGI TERBANG

• Main Authors: , ZURIABANGKIT M.S, , Ir. Djurdjani, M.SP., M.Eng, Ph.D.
• Format: Theses and Dissertations NonPeerReviewed
• Published: [Yogyakarta] : Universitas Gadjah Mada 2013
• Subjects: ETD
• Online Access: https://repository.ugm.ac.id/124676/; http://etd.ugm.ac.id/index.php?mod=penelitian_detail&sub=PenelitianDetail&act=view&typ=html&buku_id=64832
• Institution: Universitas Gadjah Mada

The accuracy of LiDAR radiation can be influenced by object reflectivity and the flight altitude. Objects that have a relatively open coverage will result more accurate data because the signal laser beam is not obstructed by vegetation or buildings. This study was conducted to determine the value of elevation accuracy of LiDAR radiation results in a relatively open area with different flight altitude. The selected areas of this study are paved roads and some dynamic land located in Tajem, Yogyakarta. This study used two sets of LiDAR DTM as the radiation results from 1000 meter flight altitude and and 500 meter flight altitude. The elevation accuracy of LiDAR radiation result is determined by 169 tested points which were measured using Total Station (TS). Linear interpolation is needed in the process of determining LiDAR tested points since they are not precisely fit the LiDAR point cloud. The elevation accuracy of LiDAR radiation result from the 1000 meter flight altitude reached 0.090 meter and the result from 500 meter flight altitude reached 0.069 meter. The radiation in the 500 meter flight altitude is more accurate in the elevation level compare to the radiation in the 1000 meter flight altitude. In this research, the influence of flight altitude resulted 2,1 cm margin differenceThe difference value is not too significant because the value is less than LiDAR accuracy tolerance namely 15 cm.