A New Approach In Sintering Formulationof A Cristalline Polymer For Selective Laser Sintering Application

A New Approach In Sintering Formulationof A Cristalline Polymer For Selective Laser Sintering Application

This paper reports the results of an investigation in sintering formulation of a crystalline polymer. It highlights a development of a new approach to formulation of a sintering process based on the viscosity measurement due to the lack of crystalline polymer's data. Two areas were addressed du...

Saved in:

書目詳細資料
主要作者:	Perpustakaan UGM, i-lib
格式:	Article NonPeerReviewed
出版:	[Yogyakarta] : Universitas Gadjah Mada 2004
主題:	Jurnal i-lib UGM
在線閱讀:	https://repository.ugm.ac.id/23049/ http://i-lib.ugm.ac.id/jurnal/download.php?dataId=5980
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

AFinite Element Model For A Selective Laser Sintering of A Polycarbonate Powder Block
由: Perpustakaan UGM, i-lib
出版: (1997)

Pembuatan alloy PbS dengan metoda sintering
由: Perpustakaan UGM, i-lib
出版: (1995)

Binding Mechanism and Shrinkage Prediction of Polypropylene, Polyethylene and Silica Particles in Isothermal Sintering Process
由: Perpustakaan UGM, i-lib
出版: (2007)

Peningkatan Densitas Dan Kekeuatan Mekanis Silikon Karbida (SIC)_ Dengan Kombinasi Sinter Dan HIP
由: Perpustakaan UGM, i-lib
出版: (1996)

Development of carbon-based polymer nanocomposite powder for selective laser sintering
由: Sim, Derek Jia Shu
出版: (2015)

Development of polymeric nanocomposites for selective laser sintering
由: Wong, Wendell Shun Yin
出版: (2017)

Process optimization for selective laser sintering of polypropylene
由: Wu, Kunlin
出版: (2021)

Measuring Indonesia's Technology Capacity: New And Old Approaches
由: Perpustakaan UGM, i-lib
出版: (1996)

Direct selective laser sintering and melting of ceramics : a review
由: Sing, Swee Leong, et al.
出版: (2018)

Laser Induced Spark Ignition And The Effect Of Laser
由: Perpustakaan UGM, i-lib
出版: (2004)

Effect of Additives on Sinterability and Densification of Laser-Sintered Metal Powder
由: Zhu, H.H., et al.
出版: (2014)

The Development Of Textile Industry In Indonesia During The New Order, A Study With Catching-Up Product Cycle Approach
由: Perpustakaan UGM, i-lib
出版: (2000)

STUDI SELECTIVE LASER SINTERING UNTUK KOMPONEN OTOMOTIF
由: , Heru Santoso Budi Rochardjo, dkk.
出版: (2002)

Analysis and optimization of selective laser sintering for thermoplastic polyurethane
由: Leong, Jieyong
出版: (2015)

New Institutional Economics of the State: An Alternative Approach to Regional Autonomy in Indonesia
由: Perpustakaan UGM, i-lib
出版: (2004)

Thermobiology and Clinical Application of Interstitial and Superficial Hyperthermia in Two Groups of Patients: a New Approach for Treating Malignant Tumors
由: Perpustakaan UGM, i-lib
出版: (1989)

EXPERT EVIDENCE: DEFINING NEW APPROACH TO THE ADVERSARIAL METHOD IN THE COMMON LAW SYSTEM'
由: Perpustakaan UGM, i-lib
出版: (2007)

Developing a novel biocomposite on selective laser sintering for tissue engineering
由: Florencia Edith Wiria
出版: (2008)

Modifikasi Sistem Laser Nitrogen untuk Meningkatkan Efisiensi Gas Nitrogen dan Daya Keluaran Laser
由: Perpustakaan UGM, i-lib
出版: (2004)

Spektroskopi laser - berkas atom barium
由: Perpustakaan UGM, i-lib
出版: (1992)

Laser serat optis studi teoretis
由: Perpustakaan UGM, i-lib
出版: (1995)

Laser zat warna dengan pemompaan
由: Perpustakaan UGM, i-lib
出版: (1997)

Ligan baru yang selektif terhadap Cu(II) dalam transport membran cair = A New Carrier Exhibiting Cu (II) Selective Across Liquid Membrane Transport
由: Perpustakaan UGM, i-lib
出版: (2004)

A COMPACT TEA CO2 LASER FOR FIELD-BASED SPECTROCHEMICAL ANALYSIS OF GEOLOGICAL SAMPLES
由: Perpustakaan UGM, i-lib
出版: (1993)

Penentuan Sifat-Sifat Mekanis Laser Coatings Dan Laser Surface lloys Dengan Metode Indentasi Micro Vickers
由: Perpustakaan UGM, i-lib
出版: (2000)

Penentuan Sifat-sifat Mekanis Laser Coatings Dan Laser Surface Alloys dengan Metode Mikroindentasi Hertsto estimate the ela
由: Perpustakaan UGM, i-lib
出版: (1997)

Pemetaan dari Udara dengan Sistem Laser.
由: Perpustakaan UGM, i-lib
出版: (1986)

Spektrometer Fotoakustik Laser Sistem Sel Multipass
由: Perpustakaan UGM, i-lib
出版: (2005)

Laser zat padat tertala titanium: sapphire
由: Perpustakaan UGM, i-lib
出版: (1997)

Effects of Temperature on Particle Coalescence in the Selective Laser Sintering Process
由: Cheung, See Lin, et al.
出版: (2016)

Fabrication and characterization of biocomposite scaffold using selective laser sintering
由: Lee, Joyce Xin Yi.
出版: (2009)

Development and optimization of polypropylene-based powders for selective laser sintering
由: Tan, Lisa Jiaying
出版: (2021)

Development of scaffolds for tissue engineering using selective laser sintering
由: Tan, Kwang Hui.
出版: (2011)

Selective laser sintering of porous silica enabled by carbon additive
由: Chang, S, et al.
出版: (2020)

Does Accounting Need A New Methodology?
由: Perpustakaan UGM, i-lib
出版: (1997)

POROGEN EFFECT TOWARDS THE QUALITY OF CURCUMIN IMPRINTED POLYMER
由: Perpustakaan UGM, i-lib
出版: (2011)

Spektrometer Fotoakustik Laser Sistem Multipass Berkepekaan Ppt
由: Perpustakaan UGM, i-lib
出版: (2002)

TOWARD A NEW PARADIGM OF MARKETING Understanding Customers*
由: Perpustakaan UGM, i-lib
出版: (2002)

Direct laser sintering of a silica sand
由: Tang, Y., et al.
出版: (2014)

Analisis sistim modulasi secara eksternal laser he-ne
由: Perpustakaan UGM, i-lib
出版: (1994)