Rendemen Pembuatan Papan Sambung Di PT albasi Parahyangan Banjar Dan Cara Menaikkannya

• Main Author: Perpustakaan UGM, i-lib
• Format: Article NonPeerReviewed
• Published: [Yogyakarta] : Universitas Gadjah Mada 1995
• Subjects: Jurnal i-lib UGM
• Online Access: https://repository.ugm.ac.id/23818/; http://i-lib.ugm.ac.id/jurnal/download.php?dataId=6779
• Institution: Universitas Gadjah Mada

ABSTRACT Jointboard manufacturing recovery at PT Albasi Parahyangan Banjar was calculated. Calculation was made by volume at each machine. Volume loss or left was computed by multiplying their dimension (width, thickness and length) or their original dimension in the wood (for sawdust and shaving). Observation was also made to increase board recovery. The results showed that for final jointboard recovery of sengon 6 mm- and 13 mm-thick were found 12.30 and 30.02% respectively, while of pine at 40 mm thickness was 17.20%. Board recovery can be increased by calculating thickness cutting at headsaw based on products thicknesses and sawkerf at resaw, decrease length allowance of strips, careful strip composing and sanding no more than one millimeter thick at each face