Machinability of inconel 718 during face mill

Machinability of inconel 718 during face mill

In the present study, 8 experiments were conducted in dry cutting and compressed air using full factorial design. The controlled parameters are the cutting speed (20-40 m/min), the feed rate (0.1-0.2 mm/tooth) and the fixed depth of cut (0.1 mm), respectively. The result depicted that the durat...

Full description

Saved in:
Bibliographic Details
Main Authors: M.S.A., Hafiz, W.N.F., Mohamad, M.S., Kasim, N.S.M., Zainurin, M., Akmal, R., Izamshah, S.B, Mohamed
Format: Conference or Workshop Item
Language:English
Published: 2018
Subjects:
HD28 Management. Industrial Management
T Technology (General)
TJ Mechanical engineering and machinery
Online Access:http://eprints.unisza.edu.my/1590/1/FH03-FRIT-18-17349.pdf
http://eprints.unisza.edu.my/1590/
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Sultan Zainal Abidin
Language: English
Description
Summary:In the present study, 8 experiments were conducted in dry cutting and compressed air using full factorial design. The controlled parameters are the cutting speed (20-40 m/min), the feed rate (0.1-0.2 mm/tooth) and the fixed depth of cut (0.1 mm), respectively. The result depicted that the duration of tool life can be extended up 46.3 min with lowest Ra value of 0.8 µm by adopting the compressed air. Besides, the optimum cutting force is 5.32 N.

Similar Items