Feasibility Study to Produce Sound Barrier Brick Using Crumb Rubber

The wastes from automobile tires are increasing day by day. Some of them are reused in pavement material. Rubbers cannot be burned otherwise it will cause environmental issues. The dumping areas are insufficient as the wastes are increasing, led to mosquito breeding cases. In conjunction with tha...

Full description

Saved in:
Bibliographic Details
Main Author: Siti Noreha Bt Che Bahrun, Siti Noreha
Format: Final Year Project
Language:English
Published: 2010
Subjects:
Online Access:http://utpedia.utp.edu.my/19/1/0001.pdf
http://utpedia.utp.edu.my/19/
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Teknologi Petronas
Language: English
id my-utp-utpedia.19
record_format eprints
spelling my-utp-utpedia.192017-01-25T09:43:49Z http://utpedia.utp.edu.my/19/ Feasibility Study to Produce Sound Barrier Brick Using Crumb Rubber Siti Noreha Bt Che Bahrun, Siti Noreha TA Engineering (General). Civil engineering (General) The wastes from automobile tires are increasing day by day. Some of them are reused in pavement material. Rubbers cannot be burned otherwise it will cause environmental issues. The dumping areas are insufficient as the wastes are increasing, led to mosquito breeding cases. In conjunction with that, a feasibility study was conducted to investigate potential of using crumb rubber in sound barrier wall application. The literature review has proved that rubberized-brick is not only has high porosity, it is also act as a good sound insulator. The properties of rubber enhanced the noise reduction as the noise is absorbed by the material. The combination of two sizes of crumb rubber which are 3.35 mm and 0.60 mm managed to produce greatest slump compared to other sizes. Fourthly percentage volumetric replacement of sand found to be optimum mixture. Hence, by adopting 40 % replacement of sand with combination crumb rubber with 3.35 mm and 0.6 mm, it was revealed that the brick was not only lighter but also stronger; 5.36 MPa. A prototype barrier wall of Im width xlm length was build using crumb rubber-added bricks. Similar, traffic noise level was generated, using a single source. The noise reduction was recorded by determining the difference of noise level at front and behind the wall and varied the location. It was proved that the noise reduction of the new potential barrier wall is much better than the conventional barrier wall using normal brick. From the study, the redundant tires can be reused to a newly product-based which is crumb rubber-added brick in sound barrier application. It is not only potential replace the conventional barrier wall but also solved two environmental problems, redundant waste tires and also traffic noise as well. 2010 Final Year Project NonPeerReviewed application/pdf en http://utpedia.utp.edu.my/19/1/0001.pdf Siti Noreha Bt Che Bahrun, Siti Noreha (2010) Feasibility Study to Produce Sound Barrier Brick Using Crumb Rubber. UNSPECIFIED. (Submitted)
institution Universiti Teknologi Petronas
building UTP Resource Centre
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Petronas
content_source UTP Electronic and Digitized Intellectual Asset
url_provider http://utpedia.utp.edu.my/
language English
topic TA Engineering (General). Civil engineering (General)
spellingShingle TA Engineering (General). Civil engineering (General)
Siti Noreha Bt Che Bahrun, Siti Noreha
Feasibility Study to Produce Sound Barrier Brick Using Crumb Rubber
description The wastes from automobile tires are increasing day by day. Some of them are reused in pavement material. Rubbers cannot be burned otherwise it will cause environmental issues. The dumping areas are insufficient as the wastes are increasing, led to mosquito breeding cases. In conjunction with that, a feasibility study was conducted to investigate potential of using crumb rubber in sound barrier wall application. The literature review has proved that rubberized-brick is not only has high porosity, it is also act as a good sound insulator. The properties of rubber enhanced the noise reduction as the noise is absorbed by the material. The combination of two sizes of crumb rubber which are 3.35 mm and 0.60 mm managed to produce greatest slump compared to other sizes. Fourthly percentage volumetric replacement of sand found to be optimum mixture. Hence, by adopting 40 % replacement of sand with combination crumb rubber with 3.35 mm and 0.6 mm, it was revealed that the brick was not only lighter but also stronger; 5.36 MPa. A prototype barrier wall of Im width xlm length was build using crumb rubber-added bricks. Similar, traffic noise level was generated, using a single source. The noise reduction was recorded by determining the difference of noise level at front and behind the wall and varied the location. It was proved that the noise reduction of the new potential barrier wall is much better than the conventional barrier wall using normal brick. From the study, the redundant tires can be reused to a newly product-based which is crumb rubber-added brick in sound barrier application. It is not only potential replace the conventional barrier wall but also solved two environmental problems, redundant waste tires and also traffic noise as well.
format Final Year Project
author Siti Noreha Bt Che Bahrun, Siti Noreha
author_facet Siti Noreha Bt Che Bahrun, Siti Noreha
author_sort Siti Noreha Bt Che Bahrun, Siti Noreha
title Feasibility Study to Produce Sound Barrier Brick Using Crumb Rubber
title_short Feasibility Study to Produce Sound Barrier Brick Using Crumb Rubber
title_full Feasibility Study to Produce Sound Barrier Brick Using Crumb Rubber
title_fullStr Feasibility Study to Produce Sound Barrier Brick Using Crumb Rubber
title_full_unstemmed Feasibility Study to Produce Sound Barrier Brick Using Crumb Rubber
title_sort feasibility study to produce sound barrier brick using crumb rubber
publishDate 2010
url http://utpedia.utp.edu.my/19/1/0001.pdf
http://utpedia.utp.edu.my/19/
_version_ 1739830631418822656