DROPLET IMPACT BEHAVIOUR OF MODIFIED BIOPOLYMER ON UREA SURFACE: EFFECT OF FILLERS
Biopolymer coating material is favoured as the coated material because it can degrade and is harmless to the environment. The polymer matrix of tapioca starchurea- borate (SUB) has been known to have the potential as a controlled release formulation. Three types of fillers which are lignin (SUB-L...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://utpedia.utp.edu.my/21654/1/2016%20-%20CHEMICAL%20-%20DROPLET%20IMPACT%20BEHAVIOUR%20OF%20MODIFIED%20BIOPLYMER%20ON%20UREA%20SURFACE-EFFETCS%20OF%20FILLERS-YON%20NORASYIKIN%20BINTI%20SAMSUDIN-MASTER%20OF%20SCIENCE%20CHEMICAL%20ENGINE%20MAY%202016.pdf http://utpedia.utp.edu.my/21654/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Teknologi Petronas |
| Language: | English |
| Summary: | Biopolymer coating material is favoured as the coated material because it can
degrade and is harmless to the environment. The polymer matrix of tapioca starchurea-
borate (SUB) has been known to have the potential as a controlled release
formulation. Three types of fillers which are lignin (SUB-Li), nanoclay bentonite (SMMT)
and nanoclay halloysite (S-HNT) were reinforced into the SUB matrix to
improve the wettability and mechanical properties. In the urea coating process, the
wetting stage plays an important phase where the material spreads on urea surface to
form a thin film layer which determines the coating uniformity of coated urea. The
droplet impact behaviour will provide further info on the solid-liquid interaction of
modified biopolymer on the urea surface. Thus, the objective of this study is to
identify which modified biopolymer composition has good droplet impact behaviour
when impacting on the urea surface at optimum temperature. The droplet impact
studies was analysed with three responses which are dynamic contact angle, spreading
factor and penetration rate by using image analysis. |
|---|