5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation

An impulse radio ultra wideband (IR-UWB) pulse generator works between 5.5-10.5 GHz for narrowband interference mitigation is proposed. With an average power of -85 dBm/MHz from 0-5 GHz, high interference avoidance has been achieved for a wide range of narrowband systems including Global Positioning...

Full description

Saved in:
Bibliographic Details
Main Authors: Ahmed R., Mohammed, Khalid A. S., Al-Khateeb, Islam, Md. Rafiqul
Format: Conference or Workshop Item
Language:English
Published: IEEE 2012
Subjects:
Online Access:http://irep.iium.edu.my/23031/1/5.5-10.5_GHz_IR-UWB_Pulse_Generator_for.pdf
http://irep.iium.edu.my/23031/
http://ieeexplore.ieee.org/xpl/articleDetails.jsp?reload=true&arnumber=6271151&contentType=Conference+Publications
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Islam Antarabangsa Malaysia
Language: English
id my.iium.irep.23031
record_format dspace
spelling my.iium.irep.230312017-07-31T02:13:52Z http://irep.iium.edu.my/23031/ 5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation Ahmed R., Mohammed Khalid A. S., Al-Khateeb Islam, Md. Rafiqul TK7885 Computer engineering An impulse radio ultra wideband (IR-UWB) pulse generator works between 5.5-10.5 GHz for narrowband interference mitigation is proposed. With an average power of -85 dBm/MHz from 0-5 GHz, high interference avoidance has been achieved for a wide range of narrowband systems including Global Positioning System (GPS), Worldwide Interoperability for Microwave Access (WiMAX), Wireless Local Area Network (WLAN) 802.11b and 802.11a. The proposed pulse generator utilizes a 1 GHz sine wave power source to work with the designed half-wave rectifier. The generated pulse width is less than 1 ns, providing a speed of about 1 Gb/s for IR-UWB system with minimum modulation complexity. A passive low pass filter (LPF) is designed with a cutoff frequency of 1.5 GHz works with the circuit up-converter mixer to generate a pulse which matches the Federal Communication Commission (FCC) requirements of UWB. The design has been carried out using Advanced Design System (ADS) software. The proposed pulse generator is supported by different modulation techniques like on-off keying (OOK) and pulse position modulation (PPM). IEEE 2012 Conference or Workshop Item REM application/pdf en http://irep.iium.edu.my/23031/1/5.5-10.5_GHz_IR-UWB_Pulse_Generator_for.pdf Ahmed R., Mohammed and Khalid A. S., Al-Khateeb and Islam, Md. Rafiqul (2012) 5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation. In: 2012 International Conference on Computer and Communication Engineering, ICCCE 2012, 3-5 Jul 2012, Kuala Lumpur. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?reload=true&arnumber=6271151&contentType=Conference+Publications 10.1109/ICCCE.2012.6271151
institution Universiti Islam Antarabangsa Malaysia
building IIUM Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider International Islamic University Malaysia
content_source IIUM Repository (IREP)
url_provider http://irep.iium.edu.my/
language English
topic TK7885 Computer engineering
spellingShingle TK7885 Computer engineering
Ahmed R., Mohammed
Khalid A. S., Al-Khateeb
Islam, Md. Rafiqul
5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
description An impulse radio ultra wideband (IR-UWB) pulse generator works between 5.5-10.5 GHz for narrowband interference mitigation is proposed. With an average power of -85 dBm/MHz from 0-5 GHz, high interference avoidance has been achieved for a wide range of narrowband systems including Global Positioning System (GPS), Worldwide Interoperability for Microwave Access (WiMAX), Wireless Local Area Network (WLAN) 802.11b and 802.11a. The proposed pulse generator utilizes a 1 GHz sine wave power source to work with the designed half-wave rectifier. The generated pulse width is less than 1 ns, providing a speed of about 1 Gb/s for IR-UWB system with minimum modulation complexity. A passive low pass filter (LPF) is designed with a cutoff frequency of 1.5 GHz works with the circuit up-converter mixer to generate a pulse which matches the Federal Communication Commission (FCC) requirements of UWB. The design has been carried out using Advanced Design System (ADS) software. The proposed pulse generator is supported by different modulation techniques like on-off keying (OOK) and pulse position modulation (PPM).
format Conference or Workshop Item
author Ahmed R., Mohammed
Khalid A. S., Al-Khateeb
Islam, Md. Rafiqul
author_facet Ahmed R., Mohammed
Khalid A. S., Al-Khateeb
Islam, Md. Rafiqul
author_sort Ahmed R., Mohammed
title 5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
title_short 5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
title_full 5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
title_fullStr 5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
title_full_unstemmed 5.5-10.5 GHz IR-UWB Pulse Generator for Narrowband Interference Mitigation
title_sort 5.5-10.5 ghz ir-uwb pulse generator for narrowband interference mitigation
publisher IEEE
publishDate 2012
url http://irep.iium.edu.my/23031/1/5.5-10.5_GHz_IR-UWB_Pulse_Generator_for.pdf
http://irep.iium.edu.my/23031/
http://ieeexplore.ieee.org/xpl/articleDetails.jsp?reload=true&arnumber=6271151&contentType=Conference+Publications
_version_ 1643608506679427072