Powder mixed micro electro discharge machining (PMμEDM)

This paper presents the influence of silicon carbide (SiC) powder concentration and electrical discharge energy in dielectric fluid of micro electro discharge machining (μEDM) of titanium alloy (Ti-6Al-4V) with tungsten carbide (WC) electrode. SiC powder concentration and electrical discharge energy...

Full description

Saved in:
Bibliographic Details
Main Author: Ali, Mohammad Yeakub
Format: Monograph
Language:English
Published: International Islamic University Malaysia 2011
Subjects:
Online Access:http://irep.iium.edu.my/28918/2/093_EDW_A11-071-0862_2011_Full_Version_of_Research_Report.pdf
http://irep.iium.edu.my/28918/
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Islam Antarabangsa Malaysia
Language: English
Description
Summary:This paper presents the influence of silicon carbide (SiC) powder concentration and electrical discharge energy in dielectric fluid of micro electro discharge machining (μEDM) of titanium alloy (Ti-6Al-4V) with tungsten carbide (WC) electrode. SiC powder concentration and electrical discharge energy were two input variables. Three responses namely surface roughness (Ra), material removal rate (MRR), and electrode wear rate (EWR) were investigated. Sixteen experiments were conducted by using two factor and four level (42) full factorial design of experiment. Data were analyzed by Design Expert® software. A multi criteria optimization on low Ra, high MRR and low EWR has been achieved which showed 2.68 μm Ra., 6.908 μg/min MRR and 1.518 μg/min EWR for the input parameters of 15.42 g/l SiC powder concentration and 54.28 μJ discharge energy. The analysis of variance revealed that powder concentrations are the most influential parameter on Ra. The optimization of MRR and EWR are mostly influenced by electrical discharge energy.