Position control of a four link hyper redundant robotic manipulator
Hyper-Redundant robotic manipulators like Serial robots, Snake robots, Tentacle robots or Continuum robots have very large number of degrees of kinematics redundancy. Position control of such a robotic manipulator comprising of more than three links and articulated joints is a big challenge due to t...
Saved in:
| Main Authors: | , , , |
|---|---|
| 格式: | Article |
| 語言: | English |
| 出版: |
Asian Network for Scientific Information
2013
|
| 主題: | |
| 在線閱讀: | http://irep.iium.edu.my/29213/1/Position_Control_of_a_Four_Link_Hyper_Redundant_Robotic_Manipulator.pdf http://irep.iium.edu.my/29213/ http://scialert.net/abstract/?doi=ajsr.2013.67.77 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Hyper-Redundant robotic manipulators like Serial robots, Snake robots, Tentacle robots or Continuum robots have very large number of degrees of kinematics redundancy. Position control of such a robotic manipulator comprising of more than three links and articulated joints is a big challenge due to the involvement of large number of trigonometric terms in its inverse kinematics equations. In this paper, a simple algorithm for the inverse kinematics solution (IKS) of a four-link serial robotic manipulator has been proposed, which is then validated experimentally. The proposed method divides the robot into two two-link virtual sub-robot and solves the inverse kinematics analytically for joint variables of each sub-robot successively. A validation experiment was conducted on a 4-link prototype to check the validity of the proposed algorithm. The experimental results showed satisfactory results with good repeatability. |
|---|