Modelling of material removal rate in EDM of nonconductive ZrO2 ceramic by Taguchi method
Electro discharge machining (EDM) technique, a noncontact machining process, is applied for structuring nonconductive ZrO2 ceramic. A conductive layer of adhesive copper is applied on the workpiece surface to initiate the sparks. Kerosene is used as dielectric for creation of continuous conductiv...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English English |
| Published: |
Trans Tech Publications Ltd., Switzerland
2013
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/31175/1/P_77_2013_Abd_Sabur.pdf http://irep.iium.edu.my/31175/4/31175_Modelling%20of%20material_scopus.pdf http://irep.iium.edu.my/31175/ https://www.scientific.net/AMM.393.246 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Islam Antarabangsa Malaysia |
| Language: | English English |
| Summary: | Electro discharge machining (EDM) technique, a noncontact machining process, is
applied for structuring nonconductive ZrO2 ceramic. A conductive layer of adhesive copper is
applied on the workpiece surface to initiate the sparks. Kerosene is used as dielectric for creation of
continuous conductive pyrolytic carbon layer on the machined surface. Experiments are conducted
by varying the peak current (Ip), pulse-on time (Ton), pulse-off time (Toff) and gap voltage (Vg).
Correlating these variables a mathematical model for material removal rate (MRR) is developed
using Taguchi method. The optimized parametric conditions are determined for higher MRR
through ANOVA and signal to noise (S/N) ratio analysis. The results showed that the Ip and Ton are
the significant parameters of MRR in EDM for nonconductive ZrO2 ceramic. The model also
showed that MRR increases with the increase of Ip and Ton, but the process is controlled by Ip as a
whole. |
|---|