Polyether sulfone-graphene oxide- polyvinyl pyrrolidone nanocomposite adsorptive membrane for arsenic removal from wastewater
Arsenic contamination poses a major public health concern and harms the environment with its toxicity. Long-term exposure to a high concentration of arsenic is harmful to human health as well as environmental biodiversity. This study is aimed to fabricate and investigate the possibility of polyether...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Iranian Environmental Mutagen Society
2021
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/90415/7/90415_Polyether%20sulfone-graphene%20oxide.pdf http://irep.iium.edu.my/90415/ http://www.jwent.net/article_244578.html |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Islam Antarabangsa Malaysia |
| Language: | English |
| Summary: | Arsenic contamination poses a major public health concern and harms the environment with its toxicity. Long-term exposure to a high concentration of arsenic is harmful to human health as well as environmental biodiversity. This study is aimed to fabricate and investigate the possibility of polyethersulfone-graphene oxide-polyvinyl pyrrolidone (PES-GO-PVP) nanocomposite adsorptive membrane and use it to enhance the removal of arsenic from wastewater. The nanocomposite membrane in this study was fabricated via the non-solvent induced phase separation (NIPS) method with the addition of polyvinylpyrrolidone (PVP) as a pore-forming agent. Based on the characterization results of GO through Fourier-Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), and Raman spectroscopy, the existence of a high quantity of oxygen-based functional groups with a high degree of oxidation was observed, which indicated that
the GO was well-synthesized. The characterization of the nanocomposite membrane indicated that the addition of GO and PVP could impact the membrane hydrophilicity and mechanical stability. Three adsorption parameters (initial concentration of arsenic, pH, and contact time) were then optimized using a face-centered central composite design (FCCCD). The arsenic removal efficiency of 88.6 % was
obtained with 55 mg/L of initial arsenic concentration, at pH 8 and 75 minutes of contact time between PES-GO-PVP membrane and the arsenic-contaminated wastewater. The Langmuir isotherm model fitted the equilibrium data, describing the monolayer adsorption mechanism that occurred on the surface of the nanocomposite membrane. Therefore, the results obtained in this study prove the suitability and promising potential of the GO modified membrane for the effective removal of arsenic through adsorption. |
|---|