Design of monopole plasma antenna using fluorescent tube for wireless transmission applications / Hanisah Mohd Zali

• Main Author: Mohd Zali, Hanisah
• Format: Thesis
• Language: English
• Published: 2015
• Subjects: Electronics; Applications of electronics
• Online Access: https://ir.uitm.edu.my/id/eprint/21611/1/TM_HANISAH%20MOHD%20ZALI%20EE%2015_5.pdf; https://ir.uitm.edu.my/id/eprint/21611/
• Institution: Universiti Teknologi Mara

This thesis explains on the design of monopole plasma antenna using fluorescent tube and reviews the antenna performances in wireless transmission experiments. In this project a commercially available fluorescent tube is used as antenna. The gas inside the fluorescent tube is a mixture of argon and mercury vapor. When the gas is sufficiently ionized into plasma state, it becomes conductive and allows radio frequency signal to be transmitted and received. Based on this concept, the fluorescent lamp was proposed to become as monopole plasma antenna due to the commercial product. This study includes three antenna designs which are antenna Design 1, antenna Design 2 and antenna Design 3. Antenna Design 1 was developed using single fluorescent tube to operate at 4.3 GHz frequency band. This antenna has good performances which achieved Sn<-10 dB from 4.0 GHz to 4.6 GHz frequency band. The resonate frequency of Sn = -18.1 dB and achieved omnidirectional radiation pattern with simulated gain = 2.24 dB. The performance of gain and directivity of monopole plasma antenna Design 1 has been enhanced by adding a cylindrical parabolic reflector at the back side of focusing signal which has been proposed in antenna Design 2. The antenna Design 2 achieved Sn<-10dB from 4.1 GHz to 4.7 Ghz frequency band and resonated at -38 dB. The antenna showed the directional radiation pattern result and enhancement of gain which is 7.283 dB. Antenna 1 and 2 are designed for radio altimeter device which is a part of radar in navigational applications. Monopole plasma antenna Design 3 is developed to operate at 2.4 GHz frequency band which is suitable for Wi-Fi applications. This antenna was integrated with Access Point router installed inside the casing of the antenna. Therefore, this complete set of plasma antenna was upgraded to Wi-Fi system. The antenna Design 3 achieved Sn<-10 dB 2.23 dB to 2.58 dB frequency band. The results was resonate at - 22.5 dB and showed the omnidirectional radiation pattern with gain = 1.948 dB. Overall, the 3 antenna designs were successfully showed good results and can be implemented in wireless transmission applications.