Reuse of sludge from water treatment plant as a construction material / Suhaida Sulaini

• Main Author: Sulaini, Suhaida
• Format: Student Project
• Language: English
• Published: 2006
• Subjects: Materials of engineering and construction; Industrial and factory sanitation; Industrial and factory wastes
• Online Access: http://ir.uitm.edu.my/id/eprint/34530/1/34530.pdf; http://ir.uitm.edu.my/id/eprint/34530/
• Institution: Universiti Teknologi Mara

Sludge are known as waste material or dewatered solid from a commercial or industrial wastewater treatment plant and potable water treatment plants. Its consist of clay, microorganisms and chemical generated from the use of coagulant material. The study of sludge is based on alum coagulant was carried out at the sedimentation tanks of Perbadanan Bekalan Air (PBA). The objectives of the study are reused water treatment sludge as a mass concrete and to determine the effectiveness of water treatment sludge as mass concretes. In order to meet these objectives the several test were done in the laboratory material such as sieve analysis, slump test, air-dry density of concrete and the most important was compression strength test. The result from this study indicates that 10% sludge passed the compressive strength requirements 25 N/mm2. However, the usage of 50% sludge improves the air -dry density of the mass concrete. It is conclude that the usage of sludge from water treatment plant is not suitable material for structural use in heavy construction industry. From the observation, it is recommended using sludge as unloading structure such as partition.