Design and development of an experimental set up to measure buckling and lateral vibration of drillstring in oil drilling operation / Mohd Zul Helmie Abu Kasim

• Main Author: Abu Kasim, Mohd Zul Helmie
• Format: Conference or Workshop Item
• Language: English
• Published: Faculty of Mechanical Engineering 2008
• Subjects: Mechanical and electrical engineering combined
• Online Access: https://ir.uitm.edu.my/id/eprint/67024/1/67024.pdf; https://ir.uitm.edu.my/id/eprint/67024/
• Institution: Universiti Teknologi Mara

Drillstring vibrations are one of the causes of premature failure in drillstring drilling operation. The most vital vibration mode is lateral vibration. It causes two categories of failure; buckling of the drillstring and forward and backward whirl vibration. Downtime due to drillstring failure is a major source of drilling cost. In this study, an experimental set up has been designed and developed to simulate an oil drilling operation to appropriate scale. This experimental rig is used to measure the buckling and lateral vibrations. A DC motor is used as the prime mover to rotate a shaft (hollow slender copper rod), which represents a drillstring. The motor rotated the shaft onto a hard surface and axial loading are introduced to the shaft. The behavior of the shaft is recorded by using Laser Doppler Vibrometer (LDV) and the digital processed signals are computationally recorded. The result from experiment can be analyzed by focusing on deflection mode of the shaft under axial loading and unconfined rotation motion.