Free-space measurement of complex permittivity and complex permeability of polar and non-polar rubber composites at microwave frequency / Mohd Fiza Abdul Majid

This project involves a free-space measurement system operating in the 7.5-12.5 GHz frequency range to measure the reflection and transmission coefficients, Sn and S21, of planar samples. It involves measurements of the dielectric constant, loss factor and loss tangent of the rubber composites. The...

Full description

Saved in:
Bibliographic Details
Main Author: Abdul Majid, Mohd Fiza
Format: Thesis
Language:English
Published: 2003
Subjects:
Online Access:https://ir.uitm.edu.my/id/eprint/69529/1/69529.pdf
https://ir.uitm.edu.my/id/eprint/69529/
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Teknologi Mara
Language: English
Description
Summary:This project involves a free-space measurement system operating in the 7.5-12.5 GHz frequency range to measure the reflection and transmission coefficients, Sn and S21, of planar samples. It involves measurements of the dielectric constant, loss factor and loss tangent of the rubber composites. The complex electric permittivity and the magnetic permeability are calculated from the measured values of Sn and S21 using FORTRAN 77 and Borlan C++ computer programs. The measurement system consists of transmit and receive horn lens antennas, a network analyzer, mode transitions and a computer. Diffraction effects at the edges of the samples are minimized by using spot focusing lens antennas. Errors due to multiple reflections between antennas via the surface of the samples are corrected by using a free-space LRL (line, reflect, line) calibration technique. Because of the samples used in this measurement is thin and flexible, it had to be sandwiched between two half-wavelength (at midband) quartz plates, to eliminates the effects of sagging. Results are reported in the operating frequency as stated above for the material used which is Teflon. To eliminate the effect of Teflon, Borlan C++ computer program is used.