Properties of scarf joint with different angle using oil palm lumber and kelempayan / Mohd Yusmizan Ab Manan
The purpose of this study was to determine the suitability and strength properties of scarf joint for the species oil palm (Elaeis guineensis) and kelempayan (Neolamarckia cadamba). It has been tested on different cutting angles such as 30, 45, 60 and uses a type of polyvinyl acetate adhesive for bo...
Saved in:
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | English |
| Published: |
2015
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/76382/1/76382.pdf https://ir.uitm.edu.my/id/eprint/76382/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Teknologi Mara |
| Language: | English |
| Summary: | The purpose of this study was to determine the suitability and strength properties of scarf joint for the species oil palm (Elaeis guineensis) and kelempayan (Neolamarckia cadamba). It has been tested on different cutting angles such as 30, 45, 60 and uses a type of polyvinyl acetate adhesive for both species. The samples were tested using the method of bending and compression using standard ASTM D7469. The results of this study show an angle of 30 species of oil palm and Kelempayan is the strongest compared to an angle of 45 and 60 in bending test. When comparing the two species of oil palm and Kelempayan, Oil palm is stronger than Kelempayan. For the compression test, the angle 60 is more resistant than an angle of 30 and 45 for both species. Therefore, the cutting angle 30 and 60 is suitable for used by industry because it is most resistant compared to the other angles following the furniture that want to produce. It can be concluded that species oil palm (Elaeis guineensis) and kelempayan (Neolamarckia cadamba) can be utilized for scarf joint in the production of furniture by using the appropriate angle. |
|---|