Three-Phase Transformerless Shunt Active Power Filter with Reduced Switch Count for Harmonic Compensation in Grid-Connected Applications

Shunt active power filter (SAPF) is the preeminent solution against nonlinear loads, current harmonics, and power quality problems. APF topologies for harmonic compensation use numerous high-power rating components and are therefore disadvantageous. Hybrid topologies combining low-power rating APF w...

全面介紹

Saved in:
書目詳細資料
Main Authors: Tareen, Wajahat Ullah Khan, Mekhilef, Saad
格式: Article
出版: Institute of Electrical and Electronics Engineers 2018
主題:
在線閱讀:http://eprints.um.edu.my/12674/
https://doi.org/10.1109/TPEL.2017.2728602
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
機構: Universiti Malaya
實物特徵
總結:Shunt active power filter (SAPF) is the preeminent solution against nonlinear loads, current harmonics, and power quality problems. APF topologies for harmonic compensation use numerous high-power rating components and are therefore disadvantageous. Hybrid topologies combining low-power rating APF with passive filters are used to reduce the power rating of voltage source inverter (VSI). Hybrid APF topologies for high-power rating systems use a transformer with large numbers of passive components. In this paper, a novel four-switch two-leg VSI topology for a three-phase SAPF is proposed for reducing the system cost and size. The proposed topology comprises a two-arm bridge structure, four switches, coupling inductors, and sets of LC PFs. The third leg of the three-phase VSI is removed by eliminating the set of power switching devices, thereby directly connecting the phase with the negative terminals of the dc-link capacitor. The proposed topology enhances the harmonic compensation capability and provides complete reactive power compensation compared with conventional APF topologies. The new experimental prototype is tested in the laboratory to verify the results in terms of total harmonic distortion, balanced supply current, and harmonic compensation, following the IEEE-519 standard.