Gain-clamped two-stage L-band EDFA with a FBG laser in second stage

A gain-clamped two-stage L-band EDFA is demonstrated by simply incorporating two different FBGs on both side of EDF in the second stage. It forms a FBG laser at 1560 nm to clamp the gain in the system. The gain is clamped at about 16.5 dB with gain variation of less than 1.0 dB at dynamic range up t...

全面介紹

Saved in:
書目詳細資料
Main Authors: Harun, Sulaiman Wadi, Ahmad, Harith
格式: Article
出版: Elsevier 2003
主題:
在線閱讀:http://eprints.um.edu.my/19643/
http://dx.doi.org/10.1016/S0030-3992(03)00112-9
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:A gain-clamped two-stage L-band EDFA is demonstrated by simply incorporating two different FBGs on both side of EDF in the second stage. It forms a FBG laser at 1560 nm to clamp the gain in the system. The gain is clamped at about 16.5 dB with gain variation of less than 1.0 dB at dynamic range up to -10 dBm. A flat gain is obtained over 30 nm of wavelength range from 1568 to 1598 nm with a gain variation of less than 1.1 dB. At the flat region, the noise figure varies from 5.0 to 5.8 dB, which is slightly higher compared to those of unclamped amplifier. The advantage of this technique is that the FBG laser does not disturb the WDM signals in the flat gain region.